Jump to content
SAU Community

Recommended Posts

Just for you Tony haha

Sorry I just had it with people trying to get money out of people lately...was had by Avis big time last week :( Twice the charge on my card that they quoted me.

Avis Toowoomba?

Going down the pipe was better than getting sucked back into the cylinders and chewing my pistons apart. Suprised they lasted the 7 years I've had it and god knows how long previously at 14psi.

I know a certain person in this thread that has a few choices of turbos lying around ;)

He's a turbo whore and chops and changes whenever he sees fit.

Said person might even still have his ceramics if you just wanna do a swap.

Btw, inconel compressor + exhaust wheel FTW :P

I'm a firm believer in if it breaks, fix it so it won't break the same way again. Ceramic turbos are on my shit list forever now. It's either a set of high flows or low mount garrets. Won't be for a little while, gotta recover from moving interstate and christmas and get the house all sorted first. Girlfriend has a list.

I'm a firm believer in if it breaks, fix it so it won't break the same way again. Ceramic turbos are on my shit list forever now. It's either a set of high flows or low mount garrets. Won't be for a little while, gotta recover from moving interstate and christmas and get the house all sorted first. Girlfriend has a list.

Ooooooor a big ass high mount precision cause you're not economic girl man ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...