Jump to content
SAU Community

Recommended Posts

Hi,

I may have the chance to go to europe for an (hopefully) extended period of time and if so would buy a car, namely a TVR T350c

I would want to bring it back,

Anyone know how bringing in one of these beasts can be done?

Rough costs? Hoops I need to jump thru?

Many thanks for any help and understanding :)

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/
Share on other sites

TVR's are the go for personal imports, no problem to register have done a couple over here. High maintenance car with issues but worth a big dollar over here compared to UK prices.

I have had dealings with the person approved under SEVS as he wanted to import under RAWS which wont happen but learnt a lot about them.

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770107
Share on other sites

Cool, ok so a TVR can be done..

My basic browsing of the standards suggests I have to own the car as an ex pat for 12months?

It would be a personal import and I would be in europe for a while but 12 months is a bit to long to be sure if it is worth investing in the car when I get there

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770192
Share on other sites

Pretty much any car can be done with a personal import. I imagine it's the same procedures required in Japan. DOTARS will need a lot of documentation - you're lucky in that you won't need to have any of it translated. You are only allowed 6 weeks out of country where the car is...any more than that you will need to provide legitimate reasons for, and it gives DOTARS grounds to knock you back.

Once you get it back in Oz, you will have to go through the steps of getting a personal import plate from Victoria, and have a workshop fit it, as well as fixing some minor safety stuff.

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770249
Share on other sites

Ok, so far so good,

Car would be purchaced in the UK before or on arrival, I would tour europe with it and have any work done by TVR specialist before bringing it back, would it be an issue if I moved the car to asia for 6months? It would be with me the whole time is what I am saying I guess

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770259
Share on other sites

No...have you read the DOTARS site yet?

http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/importing_vehicles/general/personal_imports.aspx

Particular the links on the right, Eligibility Criteria first:

http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/importing_vehicles/general/EligibilityCriteria_2.aspx

Purchase documents will have to be in your name. UK might have a different arrangement to Japan due to being so close to EU, but I doubt you could move it to another country, unless you are just taking it for a weekend to Nurburgring or something. It has to be in the country for 12 months, and so do you (with only a few exceptions).

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770264
Share on other sites

Yep I've browsed the criteria its just I am not 100% sure I can be in the UK for a full 12months,

The way I read the criteria the car needs to be rego'd etc and available to drive but doesnt state it needs to be in the same country for the entire 12months. (As long as it is with me and available to drive?)

Depending on finances I would want to be in the UK/Europe for a minimum of 6 months then Vietnam for 6 months.

I guess I should ring them and clarify, a T350c + 4.3L rebuild will come in at around $40k AU, I dont want to get this wrong lol

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770473
Share on other sites

It's fine to leave the country during the 12 month period. If it's longer than about 10 days, then you'd need to own the car longer to make up for any time spent overseas, but that's only if you don't use the car during that time.

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5771877
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...