Jump to content
SAU Community

Recommended Posts

hey guys, just spent the last 3hours cleaning my shead, heaps of bits that i dont need

ENGINE BITS:

R34 NUR RB26 inlet and exh cam shafts only done 1200ks since new $350

R34 NUR RB26 valve springs and retainers only done 1200ks since new $300

SR20 collection of 10x rocker arms, cam caps & bolts, shims & buckets, oil spray bars, if you drift an sr then your going to need these spares at 1 point lol $100

SR20de inlet manifold with throttle body and injectors and rail $100

SR20 engine flex plate $40

RB20/25 brand new starter its a 10tooth i ordered the wrong 1 for my RB26 $130

engine stand $40

DRIVETRAIN:

SR20-CA18 gearbox minus housings, all gears syncros good has cracked selector fork, perfect if you have blown a gear in your box you would be able to make a good box out of the 2 $50

S13 6 bolt drive shaft measures 680mm from flange to end of threaded spine $50

S13 6 bolt half shafts 1 long 1 short the pair $30

SUSPENSION-HANDLING-BRAKES

S13 braided front brake lines brand new $50 pair

S13 rear 4 stud hubs pair $30

S13 brand new rear whiteline adj blade swaybar $150

S13 hicas lock bar with ends $80

D1 blue alloy wheel nuts x20 brand new in box $80 suit nissan SOLD PENDING PAYMENT

D1 gold alloy wheel nuts x18 brand new in box $30 i pinched 2 out of the box

Ford xr6 G4 rear coilovers and springs in great condition $150

TURBO:

SR20 red top T25 turbo good condition minamal shaft play $190

3inch exh garret 4 bolt flange high mount dump pipe, was made for my rb26 180sx but went diffrent turbo $100

ELECTRONICS:

S15 autech sr20de ecu was manual $150

S13 sr20DE auto ecu $30 (auto ecu can be ran with manual cars)

S13 CA18 turbo auto ecu $50 (auto ecu can be ran with manual cars)

S13 sr20de complete dizzi with new nissan rotor button and cap and new top gun leads, car ran heaps better when i changed them but only lasted 2 days, bottomend spun a big end lol $100 save yourself $150 SOLD PENDING PAYMENT

S13 sr20de coil and transistor $20 SOLD PENDING PAYMENT

S13 sr20det 4x coil packs $50

S13 ca18det ignitor $50

LS1 2xcoils $40

S15 cluster tacho doesnt work but the clear plastic cover is perfect no scratches $20

180sx headlight timer box ( for pop up lights) $10 SOLD PENDING

S13 intermitent wiper moudle $10

S13 indicator switch and wiper switch $10

R34 RB26 cas sensor only done 1000ks $350 these r $700 new

Spal fan control ecu, does high and low and connects to your stock coolant temp sensor $130 (brand new in box i paid $220)

Turbosmart liquid filled fuel pressure gauge, connets to your fpr brand new $30

B&M electonic fuel pressure gauge $40 brand new

Bosch 044 style fuel pump brand new $100 have mates running these in the 10sec rotors for over 2years now and still going strong

180sx headlight pop up motors x2 $20

180sx engine bay fuse box covers both left and right $20

Pioneer 6 "splits and tweeters and the little box they come with (1 has small crack) Pionner 6"spekears $50 the whole lot

S13 speed sensor $10

S14 speed sensor $10

S13 SR20det resistor pack $10

O2 sensor (the bigger thread) suit nissan sr20 $10

Rhino window lifters brand new in box i have 2 of them and there good quality there $100 each brand new im after $50 each

STEERING:

S13 steering rack $50

S13 power steer pump (non hiacas) $50

S13 power steer resiviour $20

S13 x3 tie rods and ends (rubber boots over ball joints r ripped) $30 for all 3

S13 x2 sr20 power steering brackets $20 each

INTERIOR:

S15 glove box ( has few small scratches) $20

S15 center console $40 SOLD PENDING

S15 radio seround $40

S13 left side door trim $30 in good nik

180sx rear qtr plastic trims $20 pair

S13 door sils $20 pair

MOMO steering wheel $20 SOLD PENDING PAYMENT

BRIDE side mount universal rails brand new $50 SOLD PENDING

TYRES:

Pair of FIRENZA ST-03 225/50/17 70% left $50 pair

S13 space saver spare wheel $20

EXTERIOR:

180sx plastic headlight surrounds $40 pair

DRIFTWORKS big red tow hook brand new $50

S13 boonet cable $10

180sx rear lights SOLD

CONTACT PETE 0407008651 LOCATED IN QUAKERS HILL

http://img813.imageshack.us/g/imgp2457.jpg/ 27 pics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...