Jump to content
SAU Community

Recommended Posts

I have an issue with my r33 rb25de ! :(

So basically when the engine is COLD and i start driving it. In first and second gear when my revs are low the car makes a whining noise (i THINK when im holding down the clutch and accelerating). Realyl worries me, sounds like theres a major issue.

Any help will be appreciated!@

Link to comment
https://www.sau.com.au/forums/topic/362649-r33-whining-noise/
Share on other sites

If the clutch is worn chances are the thrust bearing is worn to,

Before I changes my clutch yhe bearing was really loud

As asked before does the noise go away when the clutchpedal is all the way to the floor?

Also you said it only happens when it's cold If

The sound goes away when the cars warm it could be a sign of a gearbox problem

Edited by stig mick

Hmmm not really sure then you might want to have that looked at by someone who's know what they are doing could be a gear box problem,

Luckily it's not a hugely expensive job to swap it over if your getingthe clutch changed it would cost any extra in labour, it's just a natter if find a decent condition reasonably price gear box

Im not 100% sure. It happens when the clutch is engaged + im accelerating. If i just hold the clutch and dont touch the gas i dont think it makes any noises.

Next time see if it is in all gears except for forth... Forth is the only gear that doesn't put pressure on the cluster shaft bearings. Could also be your input shaft bearing. Both are very common noises on our gearboxes.

Are you sure it's the trust bearing?

I've never heard a thrust bearing that loud and Ive had 5 or 6 different make cars with a very worn or slightly worn thrust bearing

Not 100% but I've got a mate who's done 3 or 4 thrust bearings in the past and he's positive that's it. Did show up very suddenly and very loudly though. Need to get an expert's opinion.

It had run out of power steering fluid!

Dude not cool, check all fluids(under bonnet) every two weeks as a guide, more if you know you have problems that cannot be fixed for a while.

EDIT: Just sayin, not hatin.

Edited by Shazza24

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers fellas, I got a price for a r33 gtst box was 1500 including post and thought it was too cheap  
    • The SS button head cap screw on the back? If so, good to know. I presumed it was there for basic assembly and nothing more. 
    • Hello, everyone. I'm new to the forum. I have a 1989 Nissan Skyline R32 GTR. I have lost all power to the interior, including AC controls, the gauge cluster, turn signals, and windows. Stuff that still works includes the horn, brake lights, radio, and headlights. All fuses, in the interior and exterior boxes, tested good.  It starts and runs fine, just with no gauge power or anything stated above. No warning lights either. Things that I have tested: - Fusable link tested fine - No other fuses blown - Alternator good - IGN switch tested fine - With my power probe, I can backfeed power through the IGN pin to the plug on the back of the gauge cluster, and everything comes back on.    So my theory is something on the control side that sends the ignition power through the system isn't doing its job, or a wire is broken. (I would think that it is the ignition switch that would do that, but who knows?). The ignition relays don't fire (all relays tested good). So what tells them to fire other than the IGN switch?  I would really appreciate it if someone had some insight on this. I have tons of hours into this; I don't want to give up in defeat! I have the HD wiring diagram, but having all those wires laid out like that on one sheet of paper makes things pretty hard to follow.  Thanks for reading, and thanks for the replies.  Where should I look next? Thanks.
    • Install a MAP sensor pre and post throttle. Best data you could have for NA, then play with the bends and/or air box and see how much of inflection is created at WOT on the plot.
    • And gone to a new home  
×
×
  • Create New...