Jump to content
SAU Community

Recommended Posts

Model: 1998, R34 gtt

Trans: manual

Odometer: 114,000kms

Location: SA

Price: 18k ono

Specs: (modifications)

  • Full 3inch catback exhaust
  • Apexi coilovers
  • aftermarket alloy radiator
  • aftermarket oil cooler
  • HD clutch
  • Front mount cooler
  • 17 inch blitz technospeed wheels (tyres have good tread level)
  • Nismo castor rods

Car is currently registered and in good working order, its never been molestered and has always maintained standard boost, 100,000km service was done 3 months ago. Car is rarely driven except for weekends and is kept undercover.

Price is negotiable but please no low-ballers or joy riders as the car deserves a good home and is my pride and joy. For genuine enquiries call or sms James on 0432 259 195

post-73030-0-47639500-1304408416_thumb.jpg

post-73030-0-99754000-1304408417_thumb.jpg

post-73030-0-01105900-1304408419_thumb.jpg

post-73030-0-10949500-1304408420_thumb.jpg

post-73030-0-52723500-1304408421_thumb.jpg

post-73030-0-58193200-1304408422_thumb.jpg

post-73030-0-50423900-1304408423_thumb.jpg

post-73030-0-56130500-1304408424_thumb.jpg

post-73030-0-58333600-1304408425_thumb.jpg

post-73030-0-58148300-1304408426_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/362972-black-r34-gtt-skyline/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...