Jump to content
SAU Community

Recommended Posts

The Valvoline Springnats are back again bigger than ever and confirmed dates for the famous Shepparton Victoria event are as usual the last weekend of November with this year being the 25th to 27th November 2011.

Now into its 19th year the Valvoline Springnats is Victoria’s LARGEST performance car festival that provides the true motor vehicle enthusiast with the opportunity to display their skills and vehicles against other enthusiasts in a safe, controlled and friendly environment.

The venue for the 2011 Springnats is the Shepparton Showgrounds which will again prove an ideal central location with its unique, ready-made paved areas suited to driving events and brand new indoor facility that was very well received by both participants and spectators alike at our 2010 event.

The Valvoline Springnats will again be all about admiring the best cars in the land including Street Machines, Hot Rods, Kustoms, Restored / Authentic as well as Imports and spending quality time with family and friends, whilst witnessing some of the most powerful cars compete side by side in Hi Octane Action Events such as Go To Whoa, Autokana, Indoor and Outdoor Show N Shine, Dyno Challenge, Autofest Corkscrew and everyone’s favourite the fiercely competitive Burnout Title.

The Valvoline Autofest Series includes, Springnats as well as our other events that have been held in Murray Bridge SA, Corowa NSW, Mount Gambier SA and our all new NSW event to be held each year in March at the Australian Mecca of Motorsport, Mount Panorama Bathurst kicking off from the 17th and 18th March 2012. Autofest events attract 100’s of entrants and many thousand spectators over the weekends providing unique environments to compare and compete.

All our events are alcohol free and thus promote a true family atmosphere where spectators are able to enjoy the enthusiasm and excitement of a motor vehicle event in a friendly environment. This has been evidenced by the fact of strong crowd attendances consisting largely of families of all ages.

The Valvoline Autofest Series of events present themselves as fantastic marketing tools for companies to profile their products and/or services.

Additional information can be obtained by visiting our website at www.autofest.com.au

Or www.gasolinemag.com.au

If you have any further queries please do not hesitate to contact via email at [email protected] or on 0417 511557.

Street Rods, Street Machines, Kustoms, Imports and Restored/Authentic are all welcomed and catered For!

Link to comment
https://www.sau.com.au/forums/topic/365529-springnats-news/
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...