Jump to content
SAU Community

S13 5 Stud Conversion, R33 Gts 4 Pots Or Gtr Brembos Both With Or Without Discs


Recommended Posts

Hi Guys,

I am after the following to fit a R31

1) 5 stud conversion kit to suit s13 front and 5 stud conversion for the rear

2) R32 GTR/R33 GTS brakes or better (GTR Brembos) front calipers with or without discs.

3) RB25 breather hoses

4) RB30 oil dip stick

There is no kit for rear that I know of? All u can do from what I've found is redrill the axle of full custom work

I have a full 5 stud conversion kit from an S15. Comes with DBA slotted and cross drilled front and rear rotors with near new pads.

PM me if you are interested

Hi , I do have in Brisbane brand new 5 stud kit for S13 Front and Rear with OEM bearing in it.Manufactured for EU,JAPAN and US market .Easy to install, just swap them over and no other parts required except re drill your rotors to 5 stud .

With this kit you DONT need knuckles or arms or any other parts at all.

Brand new still in the box 800$ plus freight if need.

No made in china or some cheap backyard made .

Got full set of R32 GTR brakes calipers and rotors F & R

or R34 front full set rotors and calipers .

Edited by familka gtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...