Jump to content
SAU Community

Recommended Posts

Was going to the big project on this thing ( RB30 etc ) but have decided I am definitely a GTR man and as such have ordered anther R32 GTR.

So it's for sale and is one of the cleanest ones around. Mods include

R34 GTR FMIC

GReddy plenum and 80mm infiniti throttle body.

Autometer boost and oil pressure gauges on pillar pod

3in Jap exhaust with very free flow Cat and one piece dump/front pipe

Kei Office coilovers all round

Bosch 910 in tank pump

Brand new exedy 9 puck clutch and pressure plate

Turbosmart BOV

Advanti 5 spoke 17x8's with reasonable firestones

78KM on the clock and I believe is genuine.

Nismo 400R type front bar and side skirts

Car has run 196 rwhp on 7 psi and a fairly rich mixture ( still on std computer)

Interior is basically immaculate with one little mark on the drivers seat and mechanically is very sound.

Price is $21K neg and can email pics

and SKYLINE plates are extra. Before you ask I want $2,500 for them....

Contact me at work or via PM

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/37250-95-r33-gts-t-man/
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...