Jump to content
SAU Community

Recommended Posts

62,000kms

engine has been fully rebuilt 12,00kms ago (including gearbox rebuild)

car has following nismo parts,

LMGT4 10.5 +15 x 18

320km dash

rear camber arms

super coppermix twin plate (new plates 12,000kms ago)

carbon pillar ganishes

weldina 3" cat back (and stainless after market larger front pipe

wheel arch lips (not fitted to vehicle)

carbon (nismo style) bonnet

smoked indicators front and side

Air Flow meters

gearbox and engine mounts

intank fuel pump

fuel pressure regulator

engine;

garrett -5 turbos... serviced and checked out of vehicle 12,00 kms ago

fully balanced with ross balancer, CP pistons, eagle rods and nismo twin plate

hks cam gears (duralumin)

tomei type B poncams 260 deg

tomei valve springs

new valve guides

arp main studs, girdle bolts

bosch 1000cc injectors

hks engine oil cooler kit

head oil restrictors

nitto 1.5mm head gasket 8.46:1 comp ratio

cams have been dialed in to comply with tomei cam specs

further mods;

alcon 365mm front brakes (6 pot) sheerly awesome

alcon 335mm rear bkakes (4 pot)

zeale function coilovers

jvc entertainment unit dvd/mp3/bluetooth

350awkw on a very healthy 22psi on 98octane... injectors are running 72% duty at this power very capable of pushing 400awkw if desired

this car has been my pride and joy (very honestly a regretful sale) i am in no rush to sell but i am at a point in my life where i would like to buy into a business...

car is immaculate on the inside and has 1 very small dent above the rear left guard (can only be seen on an angle) and the rear bar has a small paint chip that has been touched up but still visable :(

all modifications have been made in a way that you can feel safe to pop the bonnet infront of a fellow officer... the engine bay looks practically stock minus the painted cam covers and tomei valley placard.

$69,500 or near offer... all serious offers considered also i will be buying a car around the 25-35k mark a swap plus cash will be considered evo 8 MR preferably :)

pm for details and please be patient as i only check the site maybe 2-3 times a week..

regards luke

post-63942-0-30020900-1315148703_thumb.jpgpost-63942-0-11625900-1315150764_thumb.jpgpost-63942-0-76137300-1315150835_thumb.jpgpost-63942-0-26541300-1315150859_thumb.jpgpost-63942-0-02344400-1315150882_thumb.jpgpost-63942-0-25421200-1315150913_thumb.jpgpost-63942-0-16530600-1315151057_thumb.jpg

Edited by G3TR4G
Link to comment
https://www.sau.com.au/forums/topic/376232-r34-gtr-for-sale/
Share on other sites

also has apexi power fc

just runs a T piece bleed valve to keep it looking standard

1265nm torque atw

ported and high flowed head done by hanlon race engineering

splitfire coilpacks

many other things i may have for gotten

Edited by G3TR4G

ross pwr steering under drive pulley (for better steering feel) also stop the belt from jumping at higher rpms (rb26's are prone to)

tomei oil pump

tomei sump baffle plate

acl race bearings

i also have the original bonnet... might sell this seperately if anyone is interested???

also have about 50ish photos of the rebuild. spent well over 100 hours labour getting the motor to perfection.

"the quietest rebuilt and forged 26 i have ever heard" ...brett. from graham west workshops that tuned it.

Edited by G3TR4G

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...