Jump to content
SAU Community

Recommended Posts

On the way home from work I was going about 70kph, accelerated at about half or so throttle up to about 90kph and the gauges started flickering, the radio muted and what I would assume is a warning message appeared on the nav screen. After this happened I managed to recreate the fault a couple of times over the next 1km doing the same thing, slowing down to 70kph and then accelerating at around half, three quarter throttle but then after another 1km I couldn't get it to do it again.

I will see if it does it again tomorrow but has anyone else experienced this and have any idea what it could be? I have done some google searching with no luck and might start looking through the g37 manual for something similar.

Cheers

Al

i get that random japanese msg once in awhile. it's def a warning of some sort...i hope it's not too serious. the lady sounds polite, so i can't tell if she is warning me about that hobo holding onto my boot or telling me to have a nice day...:whistling:

Lol, I get that warning too every now and then, I thought that she was just commenting on the size of my package....

The warning that I am talking about is a written warning that appears on the screen not an audible warning. It stays on for a couple of seconds and then disappears, the car is otherwise acting normally.

BTW has anyone noticed that when the Japanese lady welcomes you every morning that one of the messages she uses (I'm pretty sure there are at least 2 different ones) sounds like she says "Konichiwa G'DAY MATE"!!!???!!!

Listen closely and you will hear what I am talking about.

Lol, I get that warning too every now and then, I thought that she was just commenting on the size of my package....

LOL! ahhh those japanese know when to give respect, when respect is due :worship:

I got a weird error a few weeks ago (only once)

heaps of errors came up and it said that all my doors, boot and hood was open. that freaked me out because it kept beeping like a mofo.

Lol, I get that warning too every now and then, I thought that she was just commenting on the size of my package....

The warning that I am talking about is a written warning that appears on the screen not an audible warning. It stays on for a couple of seconds and then disappears, the car is otherwise acting normally.

BTW has anyone noticed that when the Japanese lady welcomes you every morning that one of the messages she uses (I'm pretty sure there are at least 2 different ones) sounds like she says "Konichiwa G'DAY MATE"!!!???!!!

Listen closely and you will hear what I am talking about.

Never hear an audio welcome message when I start the car up, usually it just does its "ding ding" noise and that's it, but the woman never speaks. Maybe she doesn't like me, lol :) The only time she speaks to me is if my Bluetooth disconnects and the visual message also appears to confirm it (it never used to do this in mine, until I messed around with some settings and she started to announce it.) Mine is a 2007 350GT sedan type SP, with navigation and no cruise, may be different with the 370GT or 2008 onwards, never seen this error on mine though and I've had it for a year.

What year is your car guys? Any mods? Any other warning lights (like VDC/SLIP/transmission/oil pressure/battery) coming up? Engine sound normal? May help to narrow it down to a year, specific type of car, features, etc. I've tried searching G35Driver and MyG37 and got no results matching this problem specifically, maybe take someone with you in the car to take a pic when it happens and then translate it from there... probably the most obvious thing to do, if there is a clear error message there, best to try figure out what it's trying to say.

Never hear an audio welcome message when I start the car up, usually it just does its "ding ding" noise and that's it, but the woman never speaks. Maybe she doesn't like me, lol :)

Lol, show her your package...?

she often lets me know that my door is open when driving.. i would love to know what shes saying.. "your door is open!" maybe?

how often do you drive with your doors open? surely, that wouldnt be very aerodynamic?:nyaanyaa:

Thanks for all of the HIGHLY constructive assistance there gentlemen! <INSERT SARCASM>

It turns out that it was a very simple issue. It did not happen the entire way to work this morning but when I stopped at the BP for fuel, the entire car was dead when I tried to restart. As soon as this happened I popped the hood, checked the battery terminals and VOILA, the positive terminal was very loose and must have been bouncing around whilst driving yesterday. I probably did not tighten the nut properly after I reinstalled my HID's a few weeks ago, either that or I have battery Gremlins living in the garage (good thing I'm moving this weekend I guess). I would imagine that the warning that was appearing on the nav screen was saying something like "Mr Honourable Driver, your vehicle is suffering from lack of electrical current at the moment. Please inspect the electrical system at your earliest convenience. And by the way, your package is looking great as usual" or at least something along those lines.

I too have a nice Japanese lady that talks to me occasionally.

The music goes down a few decibels, she says something, but I have no warning lights or messages on the dash.

I cannot recreate the circumstances that it occurs in, but I'm considering grabbing a Japanese friend and driving around until they can tell me what she is saying.

If she is saying it on all of our cars at random times then I am pretty certain that it is not a warning of any type. Would be nice to find out though, I wish that there was a way to have the entire manual translated that wouldn't cost me $20,000. The SATNAV specific manual is actually bigger than the manual for the rest of the car....must be a good system, shame it is useless!

If she is saying it on all of our cars at random times then I am pretty certain that it is not a warning of any type. Would be nice to find out though, I wish that there was a way to have the entire manual translated that wouldn't cost me $20,000. The SATNAV specific manual is actually bigger than the manual for the rest of the car....must be a good system, shame it is useless!

yeha tell me about it

gutted that we can't use the cars full potential

imagine when they bring it out here via infiniti, how funny would it be if they used an ocker accent for the voice.

The novelty of the japanese voice wore off on me after a week because the sat nav would constantly show my car driving off into the pacific ocean & the voice would pipe in every 2 minutes probably saying something like "sir you are driving into the ocean, watch out for gamera"

I quickly found out you can turn it off completely by turning down the volume while she's speaking, I also found out by playing with the nav menu how to turn it on & off :thumbsup:

imagine when they bring it out here via infiniti, how funny would it be if they used an ocker accent for the voice.

The novelty of the japanese voice wore off on me after a week because the sat nav would constantly show my car driving off into the pacific ocean & the voice would pipe in every 2 minutes probably saying something like "sir you are driving into the ocean, watch out for gamera"

I quickly found out you can turn it off completely by turning down the volume while she's speaking, I also found out by playing with the nav menu how to turn it on & off :thumbsup:

LOL!

mate, just get your iphone synced with the car and play your music

i havent heard the GPS talk to me yet. however, i do like the fact that my car thinks it can fly over the pacific...

  • 8 years later...

My wife is Japanese, the voice in the car was talking to me about the toll thingy on the dash. When I start the car it would ask to insert the toll card. There’s a slot lower right near air con and a little black bar thingy on the left on the dash. 
Other than that, she hardly talks to me at all (the woman in the computer, not my wife)
I have replaced the head unit etc for a tesler style screen. Really nice but have to sort out a few issues with Phoenix automotive ie air con controls, no rear camera etc. but looks awesome and no more Japanese car computer in my ear as I drive.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...