Jump to content
SAU Community

Recommended Posts

hey guys my car is for sale, its a white r33 gts-t with a 34 front on it.

Owned the car for around 3 years now (i think), and i literally never get to drive it due to working long hours and having a work van.. so I'm moving on.

mods are as follows

rb25det (there is 190xxx on the dash, i was assured this engine had 75xxx on it when i bought it and it was fitted - iv put less than 2000kms on it since owning new engine)

vipec ecu with boost control setup to 10 and 18psi

K&N pod filter

hks 2540 turbo

turbosmart bov

Hybrid FMIC

full turbo back exhaust system

Tomei FPR

nismo 740 cc injectors

walbro fuel pump

splitfire coilpacks

excedy Heavy duty clutch

new calsonic radiator

air con condensor is also brand new

18"wheels with new rubber on them

alpine headunit

6x9s in parcel shelf

tweeters installed on a pillers

autometer boost gauge

dry cell battery in the boot

front and rear sway bars

it has a viper alarm system that has just stopped working, never got it fixed just used key :D

there is more stuff done to the car, i just cant remember at the moment

the 34 conversion was done by tony at perfection bodyworks. the conversion is pretty much perfect, everything lines up.

carlos at millenium motorsport tuned the car and it made 330rwhp on 18psi. lots of fun to drive

like i said the car just sits there i never drive it any more, its going back to carlos to get serviced in a week to get serviced

the paint has some blemishes mainly on the rear bar it is cracking a little bit and on the side skirts everywhere else is good.

the only known issues the car has is the starter motor is on its way out, it doesnt disengage right away after the car starts (throw out bearing i think)

asking price is $14 999

contact number 0421 467 355 car is located in morningside brisbane

sorry this add is probably really bad i'v never made one before so feel free to ask any more questions

cheers

post-12994-0-34649000-1320571913_thumb.jpg

post-12994-0-77163800-1320571941_thumb.jpg

post-12994-0-77215800-1320571968_thumb.jpg

post-12994-0-47088000-1320571988_thumb.jpg

post-12994-0-88700200-1320572006_thumb.jpg

post-12994-0-90964000-1320572029_thumb.jpg

post-12994-0-55012000-1320572050_thumb.jpg

post-12994-0-60598100-1320572081_thumb.jpg

Edited by existence
Link to comment
https://www.sau.com.au/forums/topic/382235-fs-96-s2-r334-gts-t/
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...