Jump to content
SAU Community

Recommended Posts

MASSIVE PRICE DROP BECAUSE I NEED CASH ASAP!

Item Description: R33 GTR V-Spec, Rebuilt Motor, Never been Boosted

Location: Camden, NSW

Phone Number: 0434 437 383

Item Condition: 92,000kms. Rebuilt Motor about 15,000kms ago, Great condition. Need to drive and see for yourself

Reason for selling: Need Cash quick

Price and price conditions: $20,000

Up for sale is my White 1997 R33 GTR Vspec.

It has roughly 89,000kms on the car. But the engine has been fully rebuilt by JEM in Ingleburn NSW about 10,000kms ago... VERY FRESH! (have papers to prove)

The build cost just over $9,000

The car is always maintained using the highest quality oils. Generally Royal Purple 10w-40 roughly every 4,000km.

The List:

- 1997 RB26DETT V-Spec

- Splitfire Coil Packs

- Cat Back Exhaust (Not loud)

- High Flow Cat

- REBUILT engine (Have papers to prove - 10,000kms - FRESH)

- New water pump

- New thermostat

- New Clutch (Pull type - sprigot bearing)

- N1 Oil Pump

- Gates Racing timing belt

- Apexi Power Intake Kit

- Front Mount Intercooler

- 5% window tint

- Brand new Faulken Tyres ($1500 for all 4)

- Work Emotion Light Weight race rims

- Turbo Timer

- All original boost, torque, oil temp gauges work perfectly unlike most

- Mongoose M80 Alarm, Immobiliser and shock/tilt sensors

- Upgraded Speakers and Headunit

- Xenon Headlights

There are probably more things that i cant think of at this point in time.

If you have any inquiries feel free to message or call me my name is Elliott.

0434437383

Cheers

post-52473-0-63353500-1323814965_thumb.jpg

post-52473-0-96046100-1323814988_thumb.jpg

post-52473-0-73615300-1323815015_thumb.jpg

post-52473-0-12653100-1323815052_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/385679-nsw-white-1997-r33-gtr-v-spec/
Share on other sites

  • 3 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...