Jump to content
SAU Community

S14 / S15 Parts Inc: Xtreme 6 Puck Clutch Kit, Ca/rb Ngks, Hybrid Intercooler, K&n Panel Filter, Used Oem Mounts


Recommended Posts

Located in Southern Suburbs of SA.

Pickup preferred but will post if necessary.

No low-ballers please but willing to consider somewhat reasonable offers.

Reason for sale is because I have since upgraded and no longer require the current parts:

Used but good condition S15 6 Puck Xtreme Clutch which was installed in April this year. - $800 ONO

Car is a daily and it has only travelled around about 10,000 kms, cost me $980 alone for the clutch when it was replaced in April.

The entire kit is being sold including:

  • Xtreme 6 puck sprung clutch (ceramix & brass compund which handles well over 250 and up to 300 rwkw)
  • Lightweight moly flywheel (single-mass, less weight than the dual-mass)
  • Set of shorter high tensile flywheel bolts to fit the flywheel (could be ARP?)
  • Xtreme Pressure plate
  • Fork pivot ball

The only thing that's required is a thrust bearing, it's best to buy a new one while the clutch is out.

The part number for it is: TB40017

Part is only about $50 direct fomr ACS in Wingfield, SA

Link:

http://www.australia...sp?parentid=118

Picture attached of clutch and pressure plate:

wp000152.jpg

wp000155h.jpg

throwout.jpg

PRICE DROP: for S14 / S15 2nd hand Hybrid FMIC RS Spec - $200 ONO - Includes all silicon joiners and clamps!

Great for decent power gains required on a budget without much pressure drop.

Piping is damaged but will throw that in for free as I believe there may be missing pipes too (can only find 2 pieces since my last tune as tuners changed intercooler to a Blitz CS). Buyer is to arrange adequate piping for intercooler core.

Core was previously damaged due to the preivous owner incorrectly installing it, however it has been addressed with a weld and Epoxy. Doesn't leak any boost what-so-ever from the core.

If you are concerned it may leak then try some Expoy Multi-Metal from Sprint / Autobarn for $10, BUT I CAN GAURANTEE IT WILL NOT LEAK!

hybridfmic.jpg

S14 / S15: Unused and Unpackaged K&N Panel Filter - $80 ONO

Throw away that Ryco filter and get some air flow form a proven filter to provide better throttle response and economy.

knfilter.jpg

S15: Used Clutch fork pivot ball from an Xtreme Clutch set - $30 ONO

Previous owner had this installed on the car. You will want this if you have an aftermarket kit and didn't install the upgraded clutch fort pivot ball to minimise the load that's placed on the standard one.

2nd Hand Gearbox and Engine Mounts from an S15, OK Condition - Make an offer $40 or so?

mount1j.jpgmount2v.jpg

mount3q.jpg

8x NGK BCPR7ES to Suit Modified CA / RB Setups (will fit SR but not the preferred sparkplug) - $30 ONO

sparkplugs.jpg

Will post some items if they don't sell locally except for the intercooler.

In regards to contacting, please PM me and we can go from there.

Cheers.

Edited by Ruff Ryda

NOTE: Fork pivot ball above is included, it won't be sold as a seperate item so please disregard the listing where it mentions it's for sale at $30 ONO.

  • 1 month later...

Bump.

NOTE: Clutch is XTD, the fly and pressure plate is Xtreme.

Any offers?

Edited by Ruff Ryda

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...