Jump to content
SAU Community

Recommended Posts

Good Morning SAU Members:

Today I am here for a few reasons. Foremost, some time this year I am moving from Cairns to Perth and very specifically will be driving my R34 GT-t the whole way. If funds allow I will be picking up a R32 GT-R either when I reach Brisbane, or shortly before I leave Cairns.

This is an excellent opportunity for me to both meet many of you and also shoot many of your cars. The hope would be (on top of the documentary of the trip via GoPro) that I can make a nice album featuring all walks of Skylines over the entire country (exc. Tas, sorry). Obviously I’m hoping some of the high rollers will let me shoot some of the rarer Skylines, however everything in-between is just as important. I’d like everything from HR31’s, HNR32’s, ENR34’s, etc. Nothing is unwanted. Show level or drift pig.

My second wish is a longer shot. If anybody is willing to tag along for any part of the journey it would really complete the experience. Already I will have the ER34 and BNR32. For example, I hope to find at least a few Brisbane folks willing to do the BNE-SYD leg with me. (I’d probably consider marrying anybody who did the entire trip from BNE-ADE (cars are on trains from CNS-BNE/ADE-PER.).).

Since I don’t have a date set in stone I won’t try to coordinate any meetings just yet. However I would like to drum up some interest and gauge a feel for how many people would be willing to partake. Participation levels from simply letting me take a photo of your car all the way to packing up the car after the photo shoot and heading for W.A.

What I need: People looking to have some fun with their Skylines.

What I don’t need: People telling me an ER34 isn’t built for traversing Australia.

Thanks for your time guys. I hope to see you on the road!

Kindly,

Joshua Hellyer.

(Note: Only on the QLD forum for now. No point disturbing the other states until we get closer to departing QLD.)

Edit: Fixed format.

Edited by Idaten
Link to comment
https://www.sau.com.au/forums/topic/387717-roadtrip/
Share on other sites

I've been planning to go see my family in Sydney in the next month or so. Once you got the firm dates would be really good to know, if all good I'll jump in my skyline with the missus and join the "convoy" from Brissy to Sydney and then I can catch up with family down there. More fun driving then flying :)

Link to comment
https://www.sau.com.au/forums/topic/387717-roadtrip/#findComment-6181878
Share on other sites

Nullabor is pretty special, lots of long straight road but still an amazing part of Aus.

Good road surface, speed is only 110 and policed would you believe it.

Don't travel early morning or evening due to the roos.

If you must travel at these times, sit back behing a semi and let him clear the path. Watch out for road kill flying off his wheels.

UHF is a must, just a hand held so you can chat with the truckies.

Fuel will be expensive and of suspect quality so don't go heavy with the foot.

Link to comment
https://www.sau.com.au/forums/topic/387717-roadtrip/#findComment-6192925
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...