Jump to content
SAU Community

Recommended Posts

Item : HKS GTRS TWIN TURBOS (x2)

Condition: Brand Spanking New

Reason: Will be going for a different turbo setup

Price: $3500 firm

Contact: PM me for contact number

Location: Sydney yoo

Will post interstate just PM me your location for pricing

If dumpies and manifolds are needed i can sell off with the stock ones.

If more pictures are needed just let me know and i can send

Link to comment
https://www.sau.com.au/forums/topic/388458-hks-gtrs-twin-turbos-rb26-brand-new/
Share on other sites

To answer Sinistas question...

HKS 2530's have custom HKS Comp/Ex Housings & custom HKS Spec wheel trims which have better flow properties compared to the -5's, also come std with HKS 1.2 Bar adjustable actuators.

HKS GTRS also has a custom HKS Comp housing and HKS Spec front wheel trim focussing on better flow also come with HKS 1.2 Bar adjustable actuators compared to the -10's. Pretty sure the HKS GTRS Ex housing & wheel remains exactly the same as -10's

Although main difference with HKS Turbo kits compared to Garrett supplied items is they normally come with every nut, bolt, washer, clamp, gasket, vacuum hose, oil hose & drain pipe required for the installation of replacement turbos.

GLWS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...