Jump to content
SAU Community

Recommended Posts

hey guys.

this is very regretful sale but it really has to happen.

Im selling my work euroline DH's

specs are 18 x9 +19 front and 18 x10 +21 rear. front is 5x114.3 rear is multi 114.3

rear has brand new achilles 245 40 18s done maybe 1500ks

front has yokohama advan somethins on there in 215 40 18 with a couple mm above wear bars

they are in good condition for second hand wheels. all balance well no buckles or cracks.

gutter rash on most which is expected and easily fixed.

comes with center caps

only reason im sellin them is because they really just dont fit right on my laurel.

im happy to talk about swaps for somethin in 17" with atleast 8" front and 9" rear.

thinkin price wise around about $1800 ono

pics

381667_10150382296071359_676591358_8629765_1725422582_n.jpg

DSCF1614.jpg

like i said feel free to make an offer or get some pics/specs to me for swaps for 17" wheels.

best bet is to pm me or sms/call 0420907228

cheers danny.

Link to comment
https://www.sau.com.au/forums/topic/390129-sa-18x9-18x10-euroline-dh/
Share on other sites

haha cheers guys. would love to keep them but they are to big. the pic above has -5.5 degrees of rear camber to fit the wheels in.

its currently aligned at -3.3 and scrubs on everythin but now the wheels sit about 20mm outside the gaurd and im completely against flaring gaurds.

haha

plus the side on profile of the car looks a little strange. reminds me of them matchbox cars with the spasticly oversized wheels haha.if they were 17s id make them work.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...