Jump to content
SAU Community

Gearbox Or Clutch Issue?

Slattery Gts-t
 Share

Recommended Posts

Slattery Gts-t Contributor

Slattery Gts-t

Posted
Posted

I have a really annoying problem with my r33 gts-t here's whats been done recently and what the issue is

If i shift into 2nd from 3000RPM to redline it crunches/grinds

If i shift to quickly from 2nd to 3rd it crunches/grinds (i need to go from 2nd to neutral then to 3rd to stop it)

Now heres the strange thing, If im cruising along say in 4th at 4000RPM then put my foot on the clutch and rev the car it makes a horrible grinding sound like the gears arnt engaged properly, it will only make this horrible sound while the engine is spinning at 3500-4000RPM or more and i press the clutch and rev it

If its in 4th at 4000RPM and i let the car slow down enough so when i release the clutch it should be doing 2500RPM then rev it with the clutch pressed it doesnt happen.

So in other words in any gear if the engine and gearbox input shaft are spinning at 4000RPM then i press the clutch and rev it i get this horrible sound (the pitch of the noise changes with revs)

These problems only started happening after i replaced the engine and clutch with an exedy HD clutch, turns out the engine i brought must have been an auto (had a flex plate bolted to it) I had no problems before i replaced the engine and clutch,

Today i pulled the gearbox out hoping to see some sign of this horrible grinding sound but everything looked fine, i lubed up the fork pivot realigned the clutch replaced the throw out bearing and replacing the gearbox oil with a semi syn 75w/90 grade oil. I did notice a little up/down play in the input shaft and some slight forwards/backwards play

The clutch starts grabbing half way up the pedal travel so it certainly seems to be disengaging properly

Link to comment
https://www.sau.com.au/forums/topic/393616-gearbox-or-clutch-issue/
Share on other sites
Slattery Gts-t Contributor

Slattery Gts-t

Posted
  • Author
Posted

Well, after a little more research/searching iv narrowed it down to being the fact that i havnt put a manual spigot bush in pinch.gif

Iv done just over 1000kms without one in i hope the input shaft bearing is still ok

Slattery Gts-t Contributor

Slattery Gts-t

Posted
  • Author
Posted

To all those who may care,

The symptoms i explained in my first post were all caused by having no spigot bush, i now have one installed and all is good back to the way it should be no more crunching or horrible noises

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX · Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...