Jump to content
SAU Community

Recommended Posts

hey all l i am looking to buy an r34 GTT, and i was just wondering what the factory speaker sizes and openings are?

currently i have 6.5 inch JL splits in the front and 6 inch JL rears, 2 X12" JL W0 subs and 2 sencor 100 W x 4 amps, oh and the pioneer head unit but that is staying in the current car.

basically i was wondering if my splits and rears will fit, or its possible to custom cut the panel to make them fit withgout too much hassle. if this looks unlikely i might aswell sell them with my current car.

Link to comment
https://www.sau.com.au/forums/topic/39525-r34-speaker-sizes-any-ideas/
Share on other sites

  • 2 weeks later...

6.5" splits will fit in the front doors no problem. Same for the 6" rear speakers. There's quite a lot of boot space for custom installs.

hey all l i am looking to buy an r34 GTT,  and i was just wondering what the factory speaker sizes and openings are?

currently i have 6.5 inch JL splits in the front and 6 inch JL rears, 2 X12" JL W0 subs and 2 sencor 100 W x 4 amps, oh and the pioneer head unit but that is staying in the current car.

basically i was wondering if my splits and rears will fit, or its possible to custom cut the panel to make them fit withgout too much hassle.  if this looks unlikely i might aswell sell them with my current car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...