Jump to content
SAU Community

Recommended Posts

for sale is my series 1 jzx100

mod list

exceedy hyper single plate clutch with lightened fly wheel

cusco coil overs

series 2 tail lights

cusco strut braces

slotted rotors front stock rear rotors with endless brake pads all round

hdi front mount kit

hks super scilent exhaust with high flow front pipe

wheels are 19 inch avs model 7 powder coated white

apexi cold air intake brand new in box

blitz bov is plumb back atm but the adaptor is there to make it vent to atmo all brand new still have the box

car still retains the stock air box with hks pannel filter

i have polished the cam covers /throttle body /water out let/and intercooler outlet the j pipe and inlet manifold is done in black wrinkle coat centre cover is mat black went for a stealth look less cop hastle

the car has had full major service last week done water pump all idlers and tensioner /timing belt/spark plugs /coolant/all oils diff has motul gearbox has redline shock proof engine oil gets done every 6 months or 3000 kms car does not get driven much as i get a company car and the misses drives this to and from work.

spare parts that come with car are all left overs i have from a part out of another 100 i bought there is all 4 doors with most parts still in them there is a spare boot with wing all door class and rear windscreen /2 front seats /a spare series 2 dash with no lift /stock exhaust 3 spare 19 inch tyres spare rear bar that has gay fog lights in it series 1 tail light thats all i can think of atm

$17000 ono

phone 0409454739

post-39491-0-94503900-1332361505_thumb.jpg

post-39491-0-74836200-1332361520_thumb.jpg

post-39491-0-28648100-1332361533_thumb.jpg

post-39491-0-48028400-1332361548_thumb.jpg

post-39491-0-48922800-1332361559_thumb.jpg

post-39491-0-69598300-1332361596_thumb.jpg

post-39491-0-44257100-1332361611_thumb.jpg

post-39491-0-71882400-1332361622_thumb.jpg

post-39491-0-42051700-1332361642_thumb.jpg

post-39491-0-06142200-1332361659_thumb.jpg

post-39491-0-27079000-1332361680_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/395527-jzx100/
Share on other sites

Free bump for a very tidy, and nicely subtle car: makes me miss my Chaser! thumbsup.gif

What's the mileage?

Is it factory manual or converted?

If converted, does it have the Torsen LSD?

Link to comment
https://www.sau.com.au/forums/topic/395527-jzx100/#findComment-6284548
Share on other sites

car has 90 k on it i converted it to manual before x mass has torsen lsd out of manual chaser everything to do with conversion is out of a manual jzx100 pedals box diff tail shaft i went to the extream of putting the manual tunnel in it and manual ecu car retains the original cluster just has the manual black face on it as that is the only difference between the manual and auto cluster everything kept original

if anyone wants to check it out i am more then happy to throw it on a hoist at work and you can have a look

Edited by bernardshorty
Link to comment
https://www.sau.com.au/forums/topic/395527-jzx100/#findComment-6284579
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...