Jump to content
SAU Community

Recommended Posts

HenryPhoto1.jpg

HenryPhoto2.jpg

HenryPhoto3.jpg

HenryPhoto4.jpg

Selling my 1992 Nissan S13.

A good write up of the car has been done by Henry Phan from dorifuto:

http://www.dorifutoo.com/2012/04/1685/

Has been owned by me for the last 7 years, bought it when i was on my P's to get to and from uni.

Has slowly been built to what it is today. Being N/A there wasn't much i could do to get more power out of it but I did the most I could without opening up the head, hence suspension/brakes and driveline were all concentrated on, is great fun at skid pan days. Only thing other thing left to do would be to advance the timing a few degrees which will take like 10 mins.

At a guess, the car is making close to 95rwks which is more than enough for to have some fun.

Car has been used by me at skid pan days and numerous drift days however the car is reliable as hell and is regularly serviced either every 7000 kms (when it was my daily) / every 6 months which ever came first / after every 2 events of late.

I drive up 3 hours, skid and drive 3 hours back home never once has the car broken down or been left stranded.

Anyone that knows me can vouch for this.

Car is up to 210,000 kms and still goes like it is new, revs freely, starts first time everytime.

Water pump/belts was changed less than 5,000kms ago, im sure there was more that ive forgotten

Clean car, but body does show its age

Has rego till next year, March 2013 wont come with RWC as i don't have time to organise

Plates do not come with the car

Genuine reason for sale, nothing broken or that the car is going to die. I am traveling later on this year and could do with the extra money. If not the car will sit idle at home.

No joy riders or test drivers. Will only allow test drives for serious buyers.

Price is $6,000 FIRM

Low ballers and dreams will be told where to go.

Alot of the good stuff have already been sold, so it doesnt come with the follow:

15 x 8 - 8 Mesh Wheels with 185/55/15 Federal F1's

Fets front and rear strut braces,

R32GTR 3 slat grill,

Bucket seat

Gktech drift wheel

330cm Dildo gear knob

Bee*R Rev limiter

Apexi SAFC

SZ Roof visor

Aero pods

I will get more pics of the car as it stands later.

ENGINE:

Stock SR20DE

Shortened intake

4-2-1 Jasma extractors

2.5" straight through exhaust

Punched Cat

Exedy heavy duty clutch with bigger SR20DET flywheel

SUSPENSION/BRAKES/WHEELS/DIFF

SR20DET calipers/slotted rotors/QFMARM1 pads

Tein HA 8/6 Coilovers

Rear R32 GTR Swaybar

Stock wheels/Work Ewings

R200 with a 1.49 shim

Loom has been tucked to accomodate super lowness

EXTERIOR

J's headlights with clear covers with 6000K HID KIT

CA front lip

Aero sideskirts

R32GTR boot lip

INTERIOR:

S15 drivers seat

Momo steering wheel

Sunroof

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...