Jump to content
SAU Community

Recommended Posts

I've got my Trust DD exhaust up for grabs.

I've decided to make a custom system for maximum ground clearance (my car is 20mm off the floor with kit).

Trust-DD-catback-exhaust.jpg

It has been modified, we've removed the two rear flanges and welded it to make it one piece.

Trust-DD-exhaust.jpg

I did a quick restore on it, removing rust and gave it a fresh coat of paint.

3 inch single exiting out to 2 1/4 pipes. No problems with restrictions as my car made 315kw on 15psi with this setup.

Due to the size, pickup would be best but I am happy to ship at buyers expence.

Price: $400 ono

located in Liverpool region, NSW

PM me!

Adam.

Edited by Run-It-Hard
Link to comment
https://www.sau.com.au/forums/topic/401656-r33-trust-dd-exhaust/
Share on other sites

Tips are fine, as you can see in the first photo they are pretty much polished up. There are a few marks and imperfections as you'd expect. It is an exhaust after all.

Does this have the silencers you put in and take out?? Im keen for a good twin outlet system and one I had my eye on fell through, only problem is im in Adelaide.

And this is for 33 2 door i assume?

Edited by rb2534

It doesn't have the silencers unfortunately. Your local autobarn/supercheap would have some though. I don't really like them though, I had one many moons ago and it litterally popped out of the exhaust.

Happy to ship.

Yep for a R33 2 door, It'll fit a 4 door too as the tips come out past the bumper by 20-30mm

dat-ass.jpg

R33-at-Dahtone-Racing.jpg

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...