Jump to content
SAU Community

R34 Brown Davis Roll Cage And Harnesses

34GeeTeeTee
 Share

Recommended Posts

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

Hi Guys,

I need to pay a huge bill and need cash, as much as i want to fit this cage etc for track i may have to let it go to pay some bills and then buy another one later, so its a double loss hence NO stupid offers and NO time wasters.

Item - Brown Davis Roll Cage to suit ER34 GTT, This cage was built in August 2010

Description - The cage is the half cage with harnerss bar and bolts. This cage also has side bars from the cage to the fire wall. The cage is CAMS approved and is top quality. The harnesses are both brand new Drift harnesses in their bags, 5 point but can be used as 4 point if need be (depending on seat). The cage is high quality and owes me quite a lot due to the shipping from VIC. It was near new when i purchased it and had done little work. This is removed from my car now, was trial fitted but never bolted down. You will need 3mm base plates, if it sells for the full price i will have them made next door at the Fabrication place, i spoke to Brown Davis and they said they are simply 3mm mild steel plates, nothing fancy.

Condition - Apart from some light scratches etc the cage is in perfect condition. I think it would be pretty hard to hurt it without crashing pretty hard!

Price - $1375 for the cage and both harnesses, will ONLY separate if i have a buyer for both. Delivery around Newcastle area is free, Central Coast and Sydney will cost around $50 to cover some fuel. This cage owes me around $1650 from memory so i AM already losing money.

Location - Raymond Terrace

post-47580-0-72371900-1340346725_thumb.jpgpost-47580-0-98591600-1340346759_thumb.jpgpost-47580-0-63801100-1340346982_thumb.jpg

PM me or text 0434353292

Cheers

Mat

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...