Jump to content
SAU Community

Recommended Posts

hey guys i have up for sale the following two sets of wheels.

Wheel no1

Weds Kranze Lxz chrome finish.

18x9+22 f

18x10+31 r

wheels comes with tires around 70% tread. wheels are in good condition. no buckle or chunks missing from wheels. wheels do have your usual gutter rash.

8ed1d3b0.jpg

e20a65d5.jpg

Price $2600 ono. happy to send interstate at YOUR cost

wheel no2:

SSR professor ms1. these are EOI atm as im not 100% sure if i want to fit them to my car or not.

wheels are finished in hyperblack chrome.

specs:

19" x 9 offset +11 step lip

19" x 10 offset +11 step lip

wheels are in good condition. cpiple of minor chips here and there. one wheel has a slight rash. nothing deep. will see upon inspection.

dont have any pics of the actual wheel yet. will post up soon.

$3000 ono

thanks

Ash

  • 2 weeks later...

Hey ash have a mate from JDMST thats keen on the MS1's are these the ones pictured here?

Where u located for trial fit?

http://www.skylinesaustralia.com/forums/topic/403213-nsw-fs-full-set-of-ssr-professor-ms1-hyperblack-chrome/

for sale: full set of SSR Professor MS1

specs:

19" x 9jj offset +11 NR with step lip

19" x 10jj offset +11 SL with step lip

hyper black colour with polished dish

sbc_lrg.jpg

condition of wheels is great with minor chip and mark here and there but nothing major.

there is one rash about 25cm from previous owner on one front wheel but is superficial and can be machined out easily (can arrange for this also), can arrange tyres also if need be.

RRP for these wheels are $900 per wheel before special coat and shipping

pics below are of the actual wheels on the car they were on (not a promo pic)

img8901z.jpg

img8920s.jpg

20120623143652.jpg

selling the set cheap for $2300 shipped anywhere in australia

pickup available also

please pm me

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...