Jump to content
SAU Community

Recommended Posts

We’re getting closer and closer to Meguiar’s MotorEx – The car show that should have been marked on your calendars since the start of the year!

This year’s event is going to be huge. The quality of metal being put on display is second to none, and it’s already shaping up to be something special.

We’re able to bring you a sneak-peak of what you can expect to see inside the dome. Across all classes there have been a number of spectacular entries, so the judging panel is going to have a hard time selecting winners from such a collection of fine automobiles.

motorex1-3.jpg

Kicking things off is Kevin San’s Hakosuka Skyline. This stout piece of JDM muscle has a huge fan base across internet forums and it’s not hard to see why. Packing a stroked L series power plant with triple carbs hanging off the side, we’re sure a lot of people will come just to have a peep at this thing.

motorex2-2.jpg

All stars founder Sergio Capozzi and his Vertex Ridge widebody S15 will also be attending the show in the Street Elite category. Proudly wearing its Midnight Purple duco and a fat set of 20-inch Work Meisters, this car means business and leaves a huge impression wherever it goes.

motorex3-2.jpg

Making his way up from Canberra is Nathan Ross in his Toyota Supra. Rocking a genuine TRD widebody kit and pumping out 600 horsepower at the rear bags, this streeter is a super neat all round package. It’s purposeful build and balanced approach is something you don’t see too often with Supra’s and there’s nothing it can’t do – Cruise, drag or circuit.

motorex4.jpg

Yonas Liu from JDMyard will have his race-prepped DC5R racecar at the event. Sporting a plethora of Mugen bits and pieces, this car is certainly one for the diehard Honda fans. If that isn’t enough for you, just peer inside and get a look at the insane roll cage work and stripped interior – certainly a hardcore track weapon.

motorex5.jpg

Matt Robinson’s time attack S14 is more racecar then anything out there. Rocking tough aero put together via a combination of Vertex Ridge parts and custom SX developments diffusers and spoilers, the main aim for this machine is to punch out ridiculous lap times wherever it may roam. Under the hood lies a full NIZPRO-built forged engine with ancillaries such as the turbocharger upgraded to a HKS item.

motorex6.jpg

And last but not least, proudly waving the European flag is Aaron Vumbaca in his BMW M3. With a list of modifications too long to even start on, this Bavarian beast is just simply one of the toughest M3s getting around on Sydney’s streets. With DTM touches such as the vented guards, it pays homage to the cars roots in motorsport and wouldn’t look out of place at all on the Nürburgring.

This is just an appetizer on what will be on display at MotorEx this year. There will be plenty more drool-worthy cars dotted around inside, and the only way to really experience it is to come on down and check it out for yourself!

Keep an eye on this thread as we’ll be updating it with more fresh content on what you can expect to see at MotorEx this year.

Check out www.motorex.com.au for further details

Link to comment
https://www.sau.com.au/forums/topic/403557-want-a-sneak-peak-inside-motorex/
Share on other sites

MotorEx Superstars – Profiled!

The Meguiar’s Superstars class is the pinnacle of automotive achievement. It’s where the greats of the modified car scene are pitted against each other and whoever comes out on top, and win a share in the prize pool of $55,000 cash.

So one can imagine the judging and cars selected for these categories are customised like no-other. The top class is divided into two sub classes – Hot Rod and Street machine. Let’s have a peak into what can be expected in both categories of these super-elite builds.

Top Hot Rod qualifiers.

motorex1-4.jpg

Phil Robinson‘s’39 Ford Tudor was awarded entry into the Top Hot Rod class at Summernats this year. Wearing classic billet rolling stock and finished in a quality emerald green paint scheme, Phil’s Tudor is right up there with the best.

motorex2-3.jpg

Venturing all the way from Western Australia is the one and only “SASSYLADY’ ’32 Tudor owned by Pamela Quinn. Built by TC Hot rods in the back of a tiny shed, this masterpiece takes the old school American rodding style and mixes it up with some Australian flare.

motorex3-3.jpg

Andrew Gibson’s ’32 Ford Pickup is something a little different for the class. Rodded tray backs and getting scarce in the scene, so it’s wicked to see one that made the cut into this class. From head to toe the car is detailed, including a full polished and painted undercarriage that’s clean enough to eat your brekkie from.

Street Machine qualifiers

motorex4-1.jpg

Mark Tarabay’s ‘Sublime’ S15 stands out for one reason in particular. No, it’s not the insane candy green paint. Nor is it the suicide door conversion. It’s the 13B engine conversion that gets conversations going with this car. Possibly one of the more controversial modified imports in this category, people either love it or hate it – which is why it made the cut.

motorex5-1.jpg

‘choppt’ is unlike another other HQ Monaro to date. With its lowered roofline and massive tubs, Jody Vincitorio’s ride looks super west-coast and tough as nails. The staggered trumpet setup takes the cake however, and is possibly the most crazy intake setup we’ve seen in a long time!

motorex6-1.jpg

You cannot have a Street Machine category without a good old Prem’. Sam Caruana and his ’75 HJ Premier sport the quintessential Australian style of building a tough streeter – Billets, A injected and blown eight and some trick bodywork. This one’s definitely a crowd pleaser, that’s for sure.

With the other entries stacking up to be just as quality, the competition is stiff and everyone will be gunning for that number one spot. Wonder who will earn themselves a share in the $55K and title of Best of Breed Hot Rod and Street Machine Champion for 2012? Head down to MotorEx and be there to witness it firsthand.

Ticket and date info can be found at www.motorex.com.au !

MotorEx 12 – 2 minutes with Greg Maskell

Greg Maskell is known around the hot rodding and custom car scene for building some super tough rides. First starting out as Revhead restorations, later changing the shop name to Maskell’s Customs and Classics, Maskell started modifying cars at the ripe young age of 17.

motorex1-6.jpg

Kicking his career off with an LC Torana, he has progressed from toying with his own rides to on to running a complete workshop which has, on a good day, at least 11 rides getting plenty of custom work. From concourse show cars to elite street vehicles, there isn’t nothing this guy and his team of four cannot tackle. One particular car that seems to catch the lime light wherever it goes, is the ‘PSYCHO’ XF Falcon.

Interested to see what he has to say about a car which has had over 10,000 man hours put into it? Check out the clip below.

Visit www.motorex.com.au for more information on the event!

One minute with Jody Vincitorio and ‘CHOPPT’

Jody and his car are the definition of passion. Well put it this way, he had to postpone his wedding for eight months until the car was finished. Don’t we all wish our wives-to-be could be so understanding!

motorex1-7.jpg

Over $100,000 later and nearly three years in the making, ‘CHOPPT’ tickled the judges’ fancy at Summernats earlier this year. The candy apple green HQ Monaro is simply a work of art, and pictures do not do it any justice. Come check it out this weekend at MotorEx!

Here’s a short clip with the man himself.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...