Jump to content
SAU Community

Recommended Posts

Shiva, i'll try and put this into perspective for you.

To change the colour of your car completely, you need to paint inside the doors/boot/engine bay etc. That means they will need to take out the engine and interior. Thats a lot of labour, and the whole job could cost between 5k - 10k. They might also f**k your interior in the process and not put shit back together properly. In my opinion its not worth it. Your better off selling your car and buying the colour you like.

Your other option would be stick as close as possible to black. ie just change to black pearl over the top and a new coat of clear to freshen your paint up. It will look brand new when its done, the only thing is the pearl wont be in the engine bay or inside the doors.. Nobody would even notice that. You could probably get this done for around 2k for a good job. (FYI you could probably get it done for less but it will show...)

Also from your questions, it sounds like you dont have any painting experience so i dont reconmend doing it yourself.

naah...i am not doing it myself...i dont wanna spend 5k on this...i did check some picture of matte black wrap...but it doesnt look that great on a V35.....shud i just go detailing on the interior and exterior to get away with swirls and minor scratches and few stone chips....it would cost me $700 to $800 for a good job of that....

If you want a really good detailing job check out http://arkbarrier.com.au/ they basically polish the crap out of your car then coat it in the thin layer of glass. Looks mint, plus water just runs off it.

I would also question a $2k figure for just an 'exterior surface' respray, especially if you want a pearl finish.

If done properly there is a lot of work involved.. removal of door trims, door handles, removal of windscreen/window rubber seals. headlights, bumpers, rear badges, tail lights, door bump strips, etc, etc..

I would estimate closer to $4k.. $2k for the paint and another $2k for labour.

If you just wanted a standard 2 layer paint (not pearl), you might be able to cut the paint cost a fair bit.

If you existing paint is flawless (no stone chips, deep scratches, etc), you might even get the labour a little cheaper.

unless you happen to know someone in the business and can do a 'cash in hand' deal..

If you want a really good detailing job check out http://arkbarrier.com.au/ they basically polish the crap out of your car then coat it in the thin layer of glass. Looks mint, plus water just runs off it.

Ark Barrier does not crack, bubble, flake, peel, delaminate, come off or discolour, as long as the temperature remains below 700 degrees℃.

If your car was exposed to 700+ deg C, you have other things to worry about.

I would also question a $2k figure for just an 'exterior surface' respray, especially if you want a pearl finish.

If done properly there is a lot of work involved.. removal of door trims, door handles, removal of windscreen/window rubber seals. headlights, bumpers, rear badges, tail lights, door bump strips, etc, etc..

I would estimate closer to $4k.. $2k for the paint and another $2k for labour.

If you just wanted a standard 2 layer paint (not pearl), you might be able to cut the paint cost a fair bit.

If you existing paint is flawless (no stone chips, deep scratches, etc), you might even get the labour a little cheaper.

unless you happen to know someone in the business and can do a 'cash in hand' deal..

which i do thus my price..

My V35 recently had a full respray, no colour change, just respray original colour. Costs 6k+.

If your talking about a surface spray only, i.e. no sanding back to metal and priming before applying new coat of paint, then 2-3k is probably what it would cost. If you want a proper full respray, you will be looking at north of 5k.

Envy me, i am family friends with the painter out the back of my work and i get everything done FREE unless he does "a big job" i'd give him cash or a few cartons. Just got my Front bar, Boot lid full resprayed and stone chips touched up last week completely free.

Envy me, i am family friends with the painter out the back of my work and i get everything done FREE unless he does "a big job" i'd give him cash or a few cartons. Just got my Front bar, Boot lid full resprayed and stone chips touched up last week completely free.

Will he do it for fellow skyline owners?? :)

My front passenger side door was resprayed by a previous owner (no idea why), and the colour doesn't quite match.. irritates me every time I see it..

I can talk to him, it depends how much work you want done. My mate wanted heaps of shit done and he just told him to go to a paint shop. He's a bloke you really need to get to know for him to do free stuff for you but if it's only a small job he might be happy with a bit of cash. He does A+ work i've very very happy with what he did for me.

I can talk to him, it depends how much work you want done. My mate wanted heaps of shit done and he just told him to go to a paint shop. He's a bloke you really need to get to know for him to do free stuff for you but if it's only a small job he might be happy with a bit of cash. He does A+ work i've very very happy with what he did for me.

No probs.. not sure when I would be down your way next anyway.

Don't know if the best way would be to match the colour of the rest of the car and respray the door, or match the colour of this door, and blend the colour on the adjoining panels..

matte black wrap quote = $5,200 + GST....thats a rip off.....have to rethink as to what needs to be done

Matte is hard to maintain...you'll be washing your car every weekend so you don't get dirt and grime build up. That's if you really love your car lol.

Edited by Marshan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
    • FYI: Racebox RE7R Custom Tunes Released!   https://goracebox.com/.../2017-infiniti-q50-q60-re7r-tcm...   FOR GEN 2 (21+) VEHICLES, PLEASE SEE NOTE AT BOTTOM See more   But whomever tuned your car is the tuner you should go back to, AMS, Sonictune or BT Tune....
×
×
  • Create New...