Jump to content
SAU Community

Recommended Posts

So bought a bunch of stuff at auction, found this stuff amongst it and will never ever have a use for it. Prices seem to be what they're worth but if I'm way off base feel free to let me know. Sorry for the massive images, I'm an idiot.

R34 GTR stock bonnet

Pearl white colour

No scratches/marks, was stored in a bonnet box when I bought it

$800

QviTk.jpg

R34 GTR Skirts

Bayside blue

Just the long bit, not sure if there's a piece I'm missing or if they match up to the fenders. One is perfect, other side has a little split where the rear corner is. Still easy usable.

$250

m04hC.jpg

R34 GTR Nismo Z-Tune front bar

White, fairly dusty

From all the research I've done this is a genuine Fibreglass Nismo Z-Tune front bar, also has a plastic lip on but the lip is pretty broken. There's also a small amount of damage to the grill on the left hand side of the bar, shouldn't be too hard to fix.

$600

XDPmK.jpg

a3CRB.jpg

onypD.jpg

Or $1500 for everything

Willing to ship anything at buyer's cost. Not sure on costs but I'm trying to get an ABN account with some businesses so if I get it cheap so will you. I also have a bunch of other stuff from the auction (350z bonnet, Supra bonnet, Evo 7 bonnet etc) that I'll let go for fairly cheap, hit me up.

0420 307 580

[email protected]

I'm not on here often so PMing will probably be pointless.

I would live the front bar because it's genuine nismo, but that's not z-tune, just nismo.

Correct, I have been chasing a nismo bar for awhile, wasn't after the ztune one which was lucky that I checked the thread ha..

  • 4 months later...

Yeah nismo bar not z tune any grats Anth

wish i got this one mate, been searching for one for along time. it was on hold for me then sold locally (i believe) before shipping costs were sent through so i could pay... never heard from the guy since, wasnt very happy to say the least!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...