Jump to content
SAU Community

Recommended Posts

Ok i have a r32 with a rb20det a bosch 0 580 fuel pump (i think is a 700hp pump) with a turbosmart fpr (fpr-800)

the car broke down while i was driving tried to start it but wouldnt start as the fuel pump was not working. checked fuse and relay in the boot and was algood so thought it was the pump as i have been running my gas pretty low lately and sometimes my fuel pump would make a different noise which only came on when my gas was really low so thought i had stuffed up the pump. Had a spare walbro 500hp fuel pump which is wayyyy smaller then the bosch fuel pump and installed it. Tried to start after installation and still no fuel pump noise so i checked the other relay where the cap is and found that it was not grounded properly so the fuel pump wasnt stuffed after all..(i know should hav checked it in the first place) pmo. anyway after grounding the relay again fuel pump was working again and car started. I let it idle (to warm up) and after about a minute it just turned off by itself and wont start anymore.

just wondering if anyone who has more knowledge out there could help me out. before i chuck back the bosch fuel pump back in and see if that works?

Link to comment
https://www.sau.com.au/forums/topic/410453-r32-wont-start-help-please/
Share on other sites

Check for power and earth at the fuel pump when priming the key or cranking.

Check for fuel flow at the engine by carefully removing the fuel line and placing it into a bottle to check for flow and prime

fuel pump still primes when key is turned on so guess the power and earth is allgood? i tried removing the fuel line but it just doesnt wanna come off so i squeezed it abit when priming and the line expanded which means theres flow

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...