Jump to content
SAU Community

For Sale/swap Rb26Dett New Garrett -5S Complete Setup


Recommended Posts

Hi Guys I have just spent the last 2 years building up my R32 GTR and bought everything to run twin Garrett 2860-5's. This setup has NEVER been used other than 10-15 minutes of running at idle. The car hasnt been driven so it is as new. I had to remove my engine again yesterday and have decided I want to go single instead of sticking with the twins. So I want to sell/swap this setup. Everything is made for a 32 but would probably fit 33 as well.

Kit includes:

-Brand new Garrett 2860-5's only run for 20 minutes MAX at idle x2

-Custom stainless low mount stock position manifolds x2

-Xforce split stainless dump pipes bought second hand but in excellent condition also heat wrapped x2

-Stainless y-pipe I think it's 2.75 into 3.25 but i'll check

-Complete custom 3 inch stainless piping turbo's to airflow metres to stock blowoff valve hard pipe

-Custom 3 inch alloy pipe from twin turbo pipe to cooler

-Factory 2 into 1 twin turbo pipe

-All oil lines, water lines, oil drains, metal gaskets, silicone joiners, clamps etc. full bolt on package.

The manifolds we're made By Ryan Capel from Capel motorsports and are of the best quality stock position low mount manifolds around. The only other car with these manifolds is the car that used to be known as "TWOOGLE" My mate did all the piping and it looks really good in the engine bay I have only shitty just jap mushroom filters on at the moment but the piping was made with the 150mm hks mushroom filters in mind.

I'm looking to put on a high mount GT35/40 on it so if anyone out there is thinking of swapping back to twins then hit me up and we could work something out.

I know I'm obviously not gonna get all my money back but I'd like to offset most of the cost so I'm looking for around $3400.

post-58307-0-57237400-1351235227_thumb.jpg post-58307-0-00974600-1351235346_thumb.jpg post-58307-0-38088200-1351235372_thumb.jpg post-58307-0-45103200-1351235424_thumb.jpg post-58307-0-60614400-1351235442_thumb.jpg post-58307-0-52281600-1351235461_thumb.jpg post-58307-0-71891300-1351235483_thumb.jpg post-58307-0-28530900-1351235503_thumb.jpg post-58307-0-58251800-1351235527_thumb.jpg post-58307-0-80420600-1351235654_thumb.jpg post-58307-0-10704800-1351235760_thumb.jpg post-58307-0-51992900-1351235776_thumb.jpg post-58307-0-32450200-1351235796_thumb.jpg post-58307-0-56913100-1351235816_thumb.jpg post-58307-0-65826900-1351235838_thumb.jpg post-58307-0-68145100-1351235884_thumb.jpg post-58307-0-77072700-1351235906_thumb.jpg

Didn't you end up with the other set? They're the thing thats going to be hardest to part with thats for sure. It is a great kit I've just got my sook on because I've already taken turbo's on and off this car 4 times and now I have to do it again I really cant be f**ked. Plus I said that if I ever took them off again I'd go single and I'm worried my car will keep presenting me with problems till I do as a form of punishment lol.

Didn't you end up with the other set? They're the thing thats going to be hardest to part with thats for sure. It is a great kit I've just got my sook on because I've already taken turbo's on and off this car 4 times and now I have to do it again I really cant be f**ked. Plus I said that if I ever took them off again I'd go single and I'm worried my car will keep presenting me with problems till I do as a form of punishment lol.

He never made any, not for me anyway.

Shame you didn't put them up when u pulled it apart, would of taken them!

Keep it twin!

Edited by jangles

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...