Jump to content
SAU Community

Recommended Posts

Up for sale is my auto 1997 Toyota Chaser JZX100, it has been much loved for the 7 months that I have had it. I bought it in Janurary stock with the 19inch rims, that are still on the car. I have done all the modifications to this car. All work has been carried out at S-Garage and tuned at Chequered Tuning.

WILL COME WITH 8 MONTHS REG AND RWC.

The car has now ticked over 103,xxxkms the 100k service has been completed changed oils, coolant, plugs, water pump, timing belt, and necessary gaskets.

The car has usual scratches with age, and a common problem with dash lift. Apart from this the car has been kept in great condition, since in my possession it has never spent a night not undercover, and has always been filled up with 98 octane from BP only.

Engine:

Greddy LS Spec FMIC

HKS Hybrid Hi Flow Panel Filter

AM Performance Dump and Front Pipe

HKS Hi Power Catback

Disabled ETCS

HDI Electronic Boost Controller

KTS Steel Intake Pipe

NGK Power Cables

Apexi SAFC Neo Tuned @ Chequered Tuning

Handling:

BC Racing BR Type Coilovers (Damper Adjustable)

Cusco Strut Brace

Interior:

60mm SAAS boost guage

Factory option Coin Holder

Kenwood CD/USB/AUX Headunit

Pioneer 1200W Sub with Amp.

Wheels:

Wheels are 19x8.5x35 wrapped in Triangle 245/35/19 tyres which are 95% all round

RED Blox Alloy Nuts

Exterior:

Factory Toyota Weather shields

Factory HID's

5000k Fog Lights

Origin Roof Spoiler

30% Tint All Round

Guards have been rolled.

All stock parts will be included in the sale.

I am currently looking for $12,000ono

WILL COME WITH 8 MONTHS REG AND RWC.

SMS me on 0431195777 for any enquiries or questions.

Carsales AD : http://www.carsales....ck&sort=default

You can find pics there or just sms me.

Edited by 93Q45
Link to comment
https://www.sau.com.au/forums/topic/413221-fs-97-toyota-chaser-tourerv/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Bump!

Keep the offers coming.

One of the cheapest Chasers in the country with all the basic mods done and tuned at chequered tuning.

Few blemishes but overall paint is excellent and condition of the car is fantastic, never had any issues mechanical.

  • 4 weeks later...

Any cash offers?

Needs to go, need cash to buy another car.

Last drop to 11K with 8 months rego.

It is one of the cheapest chasers in Australia, and it has all basic mods, done properly.

Will come with all stock cooler, suspension, exhaust and dump/front.

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...