Jump to content
SAU Community

Recommended Posts

Wasn't that hard to find ...

http://www.exoticspe...roducts_id=4863

I obviously have been misinformed that the underbody of the 350Z is different to our cars? I noticed the 350Z option but i didn't bother looking at it since i heard it was different.

I have learned that this isn't a true dual exhaust either and that it's overpriced, so i am having 2nd thoughts now i might even go back to the MD TDX V2 with the xyz pipe and no art pipes as i don't want to spend $2700 for an exhaust

Yeah but custom is complete shit. A big company like Exoticpeed/HKS/Apexi etc make literally hundreds of different exhaust with bends in different places, different cats/collectors/resonators/mufflers etc etc in their R&D to gain the best power levels at the best RPM and lowest Db. How could Joe Blow working out of a shed fabricate an exhaust that even remotely competes? You are not comparing apples with apples.

Check out the vendor on G35Driver for the ExoticSpeed R1-T without Y-Pipe for $1000 shipped, just now add Motordyne ART Pipes & XYZ-Pipe with HFC, Resonator or Straight Pipe Module for about another $1000 shipped.

Check out the vendor on G35Driver for the ExoticSpeed R1-T without Y-Pipe for $1000 shipped, just now add Motordyne ART Pipes & XYZ-Pipe with HFC, Resonator or Straight Pipe Module for about another $1000 shipped.

I got a reply from Dan at Assault Tech who said it'd be a 3-4 week wait on the system. I am still thinking about going down the MD TDX V2 path, i'm about half way from owning the system (with ART pipes

) a couple more weeks and i can order it. I just have pressure from the other half to save and shit so i'm being careful with buying stuff for the car haha..

Yeah but custom is complete shit. A big company like Exoticpeed/HKS/Apexi etc make literally hundreds of different exhaust with bends in different places, different cats/collectors/resonators/mufflers etc etc in their R&D to gain the best power levels at the best RPM and lowest Db. How could Joe Blow working out of a shed fabricate an exhaust that even remotely competes? You are not comparing apples with apples.

Not if you know who to go to.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...