Jump to content
SAU Community

Recommended Posts

hey everyone.

looking for everything i need to put fog lights in my r33 gts25 spec s. after a not so fun cruise up and down a local mountain with heavy fog i started mising the foglights off my evo. so im going to put some in my 33 but i want it to look stock. as far as i know and i hope i can do this ill need the following parts.

>both the left and right indicator/foglight housings/lamps.

>would also like to find a set of nismo ones that sit in the lower section of the bar for extra light (after writing off the evo cause the headlights were shit im really wanting to improve my vision)

>the indicator stalk which also has the foglight botton on it (if it will just plug and play)

> if the above dosnt work id like to find a switch that mounts into one of the empty switch holes on the dash but looks factory

> a wiring diagram for this. just a link or something

i wired up the foglights in the evo myself as the previous owner removed the entire system (idiot) so im pretty confident i can do it myself.

would it also be possible to wire up the indicator section fog lights and then put almost spotlight grade lights in the lower nismo section of the bar for just pure light?

cheers, just pm or post on here if u have any details to share.

Link to comment
https://www.sau.com.au/forums/topic/413832-r33-s1-fog-lights/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...