Jump to content
SAU Community

Recommended Posts

Righto guys i have for sale some old School Zeptor Mesh rims

I personally loved the look of them on my 32 GTR but have since upgraded to a set of LMGT4s as they are lighter and better suited for my track purposes. They have a good amount of dish on them as you will see from the pics and look very cool, They are also a rare and hard rim to find. Their size is 18x10 +15 offset

Condition is good, they have a spot of gutter rash on one of the rims the rest are good.

There is also a bit of grim around where the spokes join to the rim but that will clean up easy enough.

post-47556-0-34390300-1358313086_thumb.jpgpost-47556-0-98816100-1358312201_thumb.jpg

post-47556-0-46393900-1358312210_thumb.jpg

post-47556-0-57944500-1358312222_thumb.jpg

The rubber on these wheels are quite good as well

khumo 18x35x265 cant remember what model but they cost me around $240 each.. very good condition, done 3-4 thousand

the other 2 tyres are

Federals 595s in the same size, they started to get a bit of camber wear but i have had it rotated to the outside and theres now plenty of tread on the inside.. GOOD TO GO ;)

If you are a genuine buyer and are willing to actually come around and look at the rims ill be more then happy to unpack them for a proper inspections

Price: looking to get $1400 for the whole lot, i may negotiate if your not a knob and dont piss me off.. will consider offers on seperating tyres for a reasonable price

located Prestons Sydney

0432528844

Bump.. Pretty much sick off people trying to bargain me down and then not putting the money in once we have an agreement..

Im a reasonable bloke so Quit F#cking me around as my time is more valuable then the air you breathe and waste

Sold!! Good luck with the rims Rick

Also thanks Matt, one of the very few who actually called me with genuine interest..

To the time wasters and low ballers.. I hope you find a better pass time in your miserable lives

Mods please close thread

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...