Jump to content
SAU Community

Recommended Posts

hey all just a quick question, last night i was giving my r32 gts-t a bit of a boot on the way hame and i noticed that the boost is at 12-13 ish PSI all the way to about 5G roughly but then past that it goes back down to 10PSI ??? is this just the stock turbo running out of puff....or do you reccon iv got a leak some where?

iv only just noticed it now coz the engine has been missing for the last 4 months and i was slowly tryin to figure out what was wrong (was the plug gap!) there for havent realy given it a thrash b 4 now.

any thoughts

cheers mark

Over 5G the presure in the turbo zaust housing gets too great which forces the waste gate open and that is why you are losing boost. HKS sell waste gate replacments that are rated at 12 psi instead of 7psi and they should hold fine, they cost about $180 in total.

This is the case for r33's but i am not sure about r32's...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...