Jump to content
SAU Community

Recommended Posts

Selling off lots of parts as building up a new engine and car out of my gtr32

Garrett 2860 -10's with standard dump pipes I believe they are, one is damaged at last track day, looks like it needs a new core, exhaust compressor housing but haven't pulled it apart. $900

Splitfire coil pack hardly used but had it for some time. 300

Gtr32 cold air intake polished kit with apexi pods, 300

White line sway bar. 100

Factory g sensor. 250

Power steering pump and reservoir 100

Oil catch can and breather kit, 300

Apexi turbo timer 40

Hks blow off valves, told they are sqv, need a clean though. 270

Tomei cams A2691N stamped, told they are 260 9.1 lift. 500

Standard plenum with throttle bodies. 250

Ignition coil pack 100

Driftworks solid conversion bushes- s13/r32 to s14/r33/r34, these are brand new in box direct from uk unused, paid over 200 to get em, 100

Abs unit also for sale but not sure on price yet.

Feel free to email me or private message. [email protected] same parts are negotiable but first in will sell as I have placed them else where for sale too

post-19978-0-77483900-1370650608_thumb.jpg

post-19978-0-08800900-1370650639_thumb.jpg

post-19978-0-16665500-1370650667_thumb.jpg

post-19978-0-76875800-1370650692_thumb.jpg

post-19978-0-37313200-1370650720_thumb.jpg

post-19978-0-92239200-1370650939_thumb.jpg

post-19978-0-86762700-1370651012_thumb.jpg

post-19978-0-52633100-1370651044_thumb.jpg

post-19978-0-37589600-1370651253_thumb.jpg

post-19978-0-43644400-1370651305_thumb.jpg

post-19978-0-50097800-1370651553_thumb.jpg

post-19978-0-68505100-1370653102_thumb.jpg

Edited by stevena
  • Like 1

Will drop the turbos to 800

And hks blow off valves to 200,trying to price things to sell quickly and open for offers if they seem to much.

If purchasing pick up is from Melbourne 9-5 business hours availability, or I can send items anywhere at your cost. These parts were off my old engine and set up and aren't being used with the new set up. All parts are in working order and good condition unless specified like the turbo for example, thought that might help as I'm getting many emails asking.

Cheers guys.

Edited by stevena

price drop turbos now 500

Gtr32 cold air intake polished kit with apexi pods, 200

White line sway bar 50

Factory g sensor. 180

Power steering pump and reservoir 80

Oil catch can and breather kit, 200

Apexi turbo timer 20

Hks blow off valves, told they are sqv, need a clean though. 200

Tomei cams A2691N stamped, told they are 260 9.15 lift. 500

Standard plenum with throttle bodies. 200

Both turbos damaged? How many kms on them? Street or track use? How much psi has been through them?

Both turbos damaged? How many kms on them? Street or track use? How much psi has been through them?

Only one damaged, needs to be pulled apart to know exactly what is the issue. Other turbo is working fine. Only reason for not fixing it up and putting it back on car is we have gone to a single conversion set up. Only track use, bout 20 track days in total at 21 pound max boost, last track day when it blew was 26 pound for 2 laps.

Price drop, even open to offers so pm if your interested but don't think the price is right, as i don't like things sitting around and cash can go back into the new build.

Gtr cold air intake polished inlet with apexi pods 160

Oil catch cans and breather kit. 150

Standard plenum with throttle bodies 150

Power steering pump with reservoir 50

Turbos 470, one turbo is in perfect running order, the other looks like it needs a new core, exhaust and housing compressor.

  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...