Jump to content
SAU Community

(Melbourne Pickup Only) Brand New R34 Gtt Plazmaman Inlet Plenum, Plazmaman Twin Bov & Plazmaman Throttle Body ( Both Stealth Black) Going Cheap!


Recommended Posts

Hi All,

Johnny here I've got a stealth black plazmaman inlet plenum & 72mm throttle body for sale! Comes with everything to bolt on!!!!

The Items are all for an R34 GTT all brand new & never used! I have proof of purchase with receipts!

I bought these items last year thinking I'd have my engine ready to install them, I have recently had a different direction with my build & will no longer be needing them at this point & time. i need the money to fund other parts of the car =D

Info for plenum & throttle body from plazmaman website -

Plenum -

Based on the highly successful R33 design, we knew that there was no need to reinvent the wheel, so created a plenum to suit the R34 NEO engine as well...

Suits all street and high horsepower applications

CNC machined base with hand crafted dome top plenum, internal ram tubes and 5.5L capacity

Uses factory cable, battery and idle speed motor. Throttle body must be changed to a Plazmaman billet item, due to the OEM physical size (and ugliness!) 66mm or 72mm for street use recommended for applications of up to 900hp

Eliminates ugly water lines and wiring that sit on top of the motor near the firewall for an ultra clean look

Has the ability to turn a good looking engine bay into a show winner

Comes with stud and bolt kit and all instructions

Improve throttle response, mid range and top end powernd big top end power gains

Bolt on and tune accordingly for a 20+hp at the wheels power gain

Capable of flowing 1000+ HP with supporting throttle body

72mm throttle body -

Replace your tired, old throttle body with a billet high performance unit from Plazmaman! Used on the fastest street and race cars on the globe!

Featuring a progressive linkage

O-ring flange seal

Aerospace body and split throttle shaft material

Unique counter sunk flange bolt design

Thick 2mm brass butterfly for consistent positive seal

RPP is $965 for the plenum

RPP is $550 for the throttle body

I will not separate the parts they are to be sold as one! You will need to by both anyways for fitment!

Price is $1,450 for both. The price is firm so it's non negotiable!

I also have 2 x r32 gtst ARC air box in very good condition very rare & hard to find - $300 each

HKS Kansai front & rear strut braces very good condition - $300 for the pair

2 x rb25det 2IU turbos both need rebuild there blowing a little smoke - $120 each

18" 350z track wheels x 4 (5 stud) needs new tread - $400

19" SSA racing wheels x 4 (4 stud) needs new tread - $500

More parts to come will them soon!

These parts are pick up only! I'm located in SE Melbourne, Cranbourne 3977

Contact number is 0421556080 Johnny

Thanks looking

post-42202-0-84090300-1372148050_thumb.jpgpost-42202-0-45033100-1372148094_thumb.jpgpost-42202-0-29792700-1372148132_thumb.jpgpost-42202-0-70871400-1372148288_thumb.jpgpost-42202-0-54321700-1372148624_thumb.jpgpost-42202-0-42179000-1372148829_thumb.jpgpost-42202-0-75041200-1372149011_thumb.jpgpost-42202-0-72264900-1372149045_thumb.jpgpost-42202-0-04140800-1372149086_thumb.jpgpost-42202-0-62681600-1372149122_thumb.jpgpost-42202-0-87283000-1372149169_thumb.jpgpost-42202-0-22549400-1372149234_thumb.jpg

Edited by GTS_Kid
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...