Jump to content
SAU Community

Recommended Posts

Ok this may be a repost i dunno but has anyone seen the MTT Superbike?

This thing is NUTS!

Here are the specs.....

Engine:

Rolls Royce Allison

250 gas turbine

Power

320 HP @52,000 rpm

(286 HP @ rear wheel)

Output RPM:

6,000 rpm

Torque:

425 ft/lbs @ 2,000 rpm

Compressor Speed:

54,000 rpm

Fuel:

diesel, kerosene

Lubrication:

dry-sump/3.5 quarts turbine oil

Transmission:

2 speed automatic or manual

Rear Mirrors:

rear mounted camera with LCD color

display plus rear view mirrors

Options:

single or double seat, custom colors

Frame:

aluminum alloy

Rake:

27 degrees

Weight:

500 lbs

Seat Height:

31.5 in

Wheel Base:

68 in

Wheels:

17" carbon fiber, Dymag

Tires - Front:

120 60ZR17, Pirelli

- Rear:

200 50ZR17, Pirelli

Front Forks:

55 mm inverted

Shocks:

mono-shock adjustable

oleopneumatic, Ohlins

Brakes:

3x320 mm floating system- 4 piston

calipers, Brembo

Fuel Capacity:

8.5 gallons (34 liters)

Radar Detector:

forward and rear-looking radar

with laser scrambler, K40

I have a link for the short video of one starting up will post the link 2morrow if people are keen to have a listen

Link to comment
https://www.sau.com.au/forums/topic/43262-omg-mtt-superbike/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...