Jump to content
SAU Community

2008 Ve Ss 6 Speed Ute For Sale, Mild Mods.

kawasakirider
 Share

Recommended Posts

kawasakirider Grand Master

kawasakirider

Posted
Posted
Up for sale or swaps is my 2008 VE SS 6.0L 6 speed manual Ute. The car is in fantastic condition with only 120,000 km on the clock and drives like a dream.

This SS is much quicker than a stock one, it has had a tune (I don't have the dyno sheet or know it's actual RWKW, but it is fast). The following mods have been done to my knowledge (there may be more).

X-force extractors
High flow cats
3" Catback exhaust
SSL king springs - low but not illegal
20" speedy rims, dished, look good
Tune

This car is a fantastic example of an SS and if the price is right, I will include the number plates "GET MEE" which are worth a lot of money themselves.

SS1_zpsca0ebbfe.jpg
4BB5C26B-69FA-4F56-880D-E20DE055F2E5_zps
8470E934-1850-4648-8157-1C3991C4ECD3_zps
31B58EE6-8932-4086-9C03-F104F23BAD01_zps


Looking for $22,000 without the plates

$24,000 with the plates

I will consider trades for other fast cars such as GTR's etc, but mainly looking for cash.

The car is available in South Brisbane for viewing immediately. Please contact me on 0401029817 to make arrangements to see it. Cheers,

Trent
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...