Jump to content
SAU Community

Recommended Posts

Hey all,

I know this topic has been discussed before, but a search didn't bring up any recent topics and didn't really answer my questions.

So, after getting my car stolen from my house last week and being fortunate enough to have recovered it, I'm not going to make the same mistake of being complacent again. I want to make a multi-layered security system for it, ie. hidden kill switches, keypad immobiliser, GPS tracking, the works. The car already has an alarm and aftermarket immobiliser, but that doesn't help too much when they get hold of my keys.

Now then, what is a good solution for a keypad immobiliser? Will be looking to install myself. At the moment I'm leaning towards Sanji - wireless, and comes from the crime capital of the world. Troy, if you read this thread, I'd value your input here.

My other thought was to create one myself. Originally thought it wouldn't be too hard; keypad switch wired to relay, relay to ignition. But this probably wouldn't be as simple to do as I thought, as it would need to rearm itself when the ignition is switched off, plus not sure how it would work with programming a code. So unless someone here has the know-how on how to do that, I'll go with an off-the-shelf item for effectiveness.

Any help would be much appreciated,

Cheers,

Martin.

Link to comment
https://www.sau.com.au/forums/topic/436080-keypad-immobilisers/
Share on other sites

Thanks Gavin, replied.

Can anyone tell me what the 'fail-to-drive circuitry' function does? I imagine it is automatic rearming of the device if the car isn't started for a period of time? And is there any way to obtain the installation instructions, Sanji only give them out to dealers by the looks of it...

I'm a bit of a security fanatic myself. My take on things:

1. Car should be equipped with a properly installed alarm and immobilizer system. As we know, installation is so important. I won't reveal my tricks, but the immobilizer module should cut fuel pump and either starter or ignition. Test yourself: if you can find/access the cut points or immobilizer unit within ~15 minutes of dissassembly, it's not hidden well enough.

2. Once that is covered, if you're parking on the street or in public, always leave your car in gear and with the steering wheel turned 360 degrees from center. If they want to get it on a tow truck, they will need to get inside the car to straighten the wheels or put it into neutral. This will set of your now well hidden alarm, alerting either you, or others. Thieves obviously like to work transparently, so a loud alarm going off while the car is being towed onto the back of the truck will be less than ideal.

3. Well Hidden Kill switch. I like the idea of a keypad immobilizer, but a kill switch will do essentially the same job, and with less hassle/cost. A magnetic reed switch could be used creatively used too. Cut a different point to what you did with the alarm system. Whenever your car is parked at home or for a longer time, flick the switch. If they break in and get your keys, they still won't be going anywhere. If they're stealing your keys, they're driving it away otherwise. Hide it in the boot if you're paranoid!

4. Don't care what anyone else says, old-school devices like steering locks or even wheel locks are a useful deterrent, once all of the above are done.

5. Park out of sight at home. Trust your instinct, if a particular street looks seedy, cough up the $10 and park in a lit garage, and do what I wrote above.

  • Like 1

2. Once that is covered, if you're parking on the street or in public, always leave your car in gear and with the steering wheel turned 360 degrees from center. If they want to get it on a tow truck, they will need to get inside the car to straighten the wheels or put it into neutral. This will set of your now well hidden alarm, alerting either you, or others. Thieves obviously like to work transparently, so a loud alarm going off while the car is being towed onto the back of the truck will be less than ideal.

Had never actually thought of that, it's so simple it's brilliant! I'll be doing that from now on

I'm a bit of a security fanatic myself. My take on things:

1. Car should be equipped with a properly installed alarm and immobilizer system. As we know, installation is so important. I won't reveal my tricks, but the immobilizer module should cut fuel pump and either starter or ignition. Test yourself: if you can find/access the cut points or immobilizer unit within ~15 minutes of dissassembly, it's not hidden well enough.

2. Once that is covered, if you're parking on the street or in public, always leave your car in gear and with the steering wheel turned 360 degrees from center. If they want to get it on a tow truck, they will need to get inside the car to straighten the wheels or put it into neutral. This will set of your now well hidden alarm, alerting either you, or others. Thieves obviously like to work transparently, so a loud alarm going off while the car is being towed onto the back of the truck will be less than ideal.

3. Well Hidden Kill switch. I like the idea of a keypad immobilizer, but a kill switch will do essentially the same job, and with less hassle/cost. A magnetic reed switch could be used creatively used too. Cut a different point to what you did with the alarm system. Whenever your car is parked at home or for a longer time, flick the switch. If they break in and get your keys, they still won't be going anywhere. If they're stealing your keys, they're driving it away otherwise. Hide it in the boot if you're paranoid!

4. Don't care what anyone else says, old-school devices like steering locks or even wheel locks are a useful deterrent, once all of the above are done.

5. Park out of sight at home. Trust your instinct, if a particular street looks seedy, cough up the $10 and park in a lit garage, and do what I wrote above.

Thanks for that mate, agree with all the above points. The car does already have a 5-point immobilizer and alarm system, and I always leave it in gear when parked outside. Steering wheel at full lock is something I generally do, though will always do from now on. My car is always parked in my garage and is never visible outside except for when I am driving in or out. So really my plan now is to make it as hard to steal as possible, even if they do get my keys.

I will definitely be setting up several kill-switches, and my idea with the keypad was more to add another layer to those kill-switches. I just thought about what I would do if I was a thief. If I was trying to steal a car and it wouldn't start, the first thing I would do is check for kill-switches. If there was a keypad there, I think I would be misled into thinking that was the issue. I would probably give up then and there, but say I took the time to pull everything apart and bypass the keypad, the car then still wouldn't start. At which point I could either waste MORE time looking for kill-switches, or move on. Then after all that if they do still manage to steal the car somehow, I will have the GPS tracker as a last resort.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
×
×
  • Create New...