Jump to content
SAU Community

Recommended Posts

i have a few bits and pieces that are lying around and some are free to a good home.

R33 gts-t door cards, in very good nic except for what lools like a cigarette burn in the drivers door and an umknown mark on the passengers side. to fix the drivers will cost around $30. had it done on another car and was amazed at how un-noticable it was.

too good to throw away, see pictures. - Free to a good home. I have the rears which are perfect but not pictured. selling as i upgraded to gtr ones.

R33 gts-t Alpine front speakers see pics for specs. - free to a good home

R32 GTR Aluminium rear hub assemblies, in used condition, was going to use them for a gtr rear end upgrade but didn't need them in the end. was told they were off a v-spec but i wouln't know if they are or not. feel free to point out the difference for others if you know.

I paid $190 ea however feel free to make me an offer, i mean feel free to make me an offer!

R33 gts-t mines ecu, back when i started out i begun with this, a small cooler, fuel pressure reg and a boost tap but sadly that no longer blows my hair back and is just sobbing in my bottom draw. When i used it, i rang, then email mines, and they returned me the specs on this ecu

subsequently i took it down to Dr-drift and fitted it. off memory we saw 210kw atw.

i paid $400 for it. once again make me an offer

R33 gts-t air flow meter pink label, make an offer. 6 pack = :yes:

located in vic, western suburbs, call bj on 0413 714 354 for more questions

R33 gts-t drivers door cluster surround, the finish is cactus but it is not crracked or warped so if your looking to try your hand at painting on up then try on this one.

free to a good home.

225/40/18 achillies tyre, 2 of, too good to throw away, good for drift pracice or if your really broke then they will get you out of trouble. by the looks of them they have upwards of 90% tread left on them.

turn up with a 6 pack and they are yours.

i also have 4 more 18 inch tyres, not pictured, have good tread. 3 have the same tread pattern and 1 odd.

post-9238-0-78900600-1386947122_thumb.jpg

post-9238-0-02704300-1386947149_thumb.jpg

post-9238-0-19768400-1386947216_thumb.jpg

post-9238-0-02188000-1386947260_thumb.jpg

post-9238-0-54143100-1386947283_thumb.jpg

post-9238-0-46371300-1386947303_thumb.jpg

post-9238-0-74361900-1386947327_thumb.jpg

post-9238-0-15767300-1386947350_thumb.jpg

post-9238-0-66723800-1386947372_thumb.jpg

post-9238-0-52071500-1386947399_thumb.jpg

post-9238-0-26262500-1386947448_thumb.jpg

post-9238-0-19166500-1386947468_thumb.jpg

post-9238-0-92397500-1386947486_thumb.jpg

post-9238-0-19856600-1386947507_thumb.jpg

post-9238-0-28246700-1386947533_thumb.jpg

post-9238-0-57241900-1386947568_thumb.jpg

post-9238-0-30507800-1386947625_thumb.jpg

post-9238-0-63950300-1386947668_thumb.jpg

post-9238-0-27716100-1386947758_thumb.jpg

  • Like 1

Just so were clear the window switch is free!

postage is usually 5 to 10 dollars for this kind of stuff. feel free to pick it up though. the west is not that bad, i've only been car jacked twice this month.

haha i know its not that bad the issue is its like 3 hour round trip for me to get to point cook cost me more in petrol. pm me you account details or send me paypal invoice to [email protected] ill transfer $15 postage plus extra for the effort of posting.

cheers jarrod

easy done unarmed, totally understand bud, send me a text or call me to arrange your postage address.

well, it's not so much what changes the ecu will make, it's more what changes you should make to suit the fuel and ignition maps set in the unit by mines. See what they did is make some mods to a car eg. intercooler, pod filter, exhaust etc and then put the car on a dyno and then program the ecu to manage the optimum power for the mods they make to the engine. thesse mods are subtle and the programing is done by the famous mines workshop. you can email them just as i did and get all the details however you will need to add a fuel pressure reg, an exhaust with greater flow than standard, a larger intercooler will help and an unrestricive air filament such as a pod filter.

Just as a reminder, this this is dirt cheap!!! i had one guy throw me and offer and i jumped on it but he seems to have dissapeared.

I have bigger intercooler a pod filter and hks exhaust from cat back. I'm not sure about fuel pressure reg tho.

I have bigger intercooler a pod filter and hks exhaust from cat back. I'm not sure about fuel pressure reg tho.

well you will need one, a nismo one will do the job, they fit the original location without being noticable. around $100 bucks i think.

  • 2 weeks later...
  • 2 weeks later...

I have had two offers on the ecu so far, Accepted both but no one has follwed through on the sale.

bump!

  • 2 weeks later...

Sort of interested in the mines ecu as it will be a quick fix for my car as it's running Ritchie on stock ecu. Not sure on price as I've seen a few for sale and have no bites. I also have an r34 mines ecu If u want a swap haha

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...