Jump to content
SAU Community

Nsw: Shed Clear Out!

Run-It-Hard
 Share

Recommended Posts

Run-It-Hard Veteran

Run-It-Hard

Posted
Posted

Got a few things lying around that need a new home.

20131228_154606_zps7e0a4ec2.jpg

1.Bride Gias replica, it's a decent copy and all good other then the rip on the bolster.

Side mount.
Would suit a max of size 34 waist.
$200

20131130_194905_zpscd2e694e.jpg

_574_zps98da180a.jpg

2. HKS 3 inch exhaust
Came off a R33 GTST
Its a little banged up but does the job
$250

20140423_181544_zps7b9a8ef3.jpg

3. R33 2 door series 2 dash
good condition, no bubbling or cracks
$80

_575_zps6acb536c.jpg

4. RB20 engine mounts
Use these to get a RB in your S chassis!
$50

CAOC05%207%20ROWS%20OIL%20COOLER%20TANK%

5. 7 row oil cooler
brand new never used
AN10 fittings
$60

greddy.jpg

6. Greddy Informeter
tells you things like Speed, RPM, water temp, volts etc.
Plugs into OBD port
was installed on a R33
$120

20140423_181720_zpscecd9211.jpg

7. S15 front brake setup
lots of meat on pads and caliper. No lines, good upgrade for a R32 or even Stagea
$260

_57_zps35e59a29.jpg

_571_zps748267f6.jpg

_572_zps249a8d12.jpg

8. Custom made high mount manifold
steam pipe manifold
T4 flange and 4 bolt ext gate flange
Was made by a fabricator from Powertune many moons ago
never been used
$320

Negotable on everything, just want it outa here!

Happy to ship at buyers expense
Hoxton Park region
get me on 0490169671 (SMS preferred)
Adam.
Link to comment
https://www.sau.com.au/forums/topic/442238-nsw-shed-clear-out/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Rezz
      R35 GT-R production ends after 18 years

      By Rezz · Posted

      Order for the 2025 model R35 GT-R were accepted from 3rd March and 26th August the last order rolled off the production line at the Tochigi plant. Concerning the R35 GT-R replacement, current Nissan CEO Ivan Espinosa said "Nothing has been decided about the GT-R at this time, but we are well aware that everyone is waiting. The GT-R will evolve and reappear in the future. Please be patient until that day comes." Nissan has a lot of issues with management and finances so take Espinosa's words with a big grain of salt. From what discussions I've had and read about here in Japan, not a lot of people are confident about Nissan's future, let alone the next GT-R. 
    • Kapr
      ECU sees many times the speed than speedo does (R34 swap)

      By Kapr · Posted

      Thanks. We getting some parts along too so he will be solving the speed issue like next week so i will let you know what he came up with.   
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
×
×
  • Create New...