Jump to content
SAU Community

Recommended Posts

Got a few things lying around that need a new home.

20131228_154606_zps7e0a4ec2.jpg

1.Bride Gias replica, it's a decent copy and all good other then the rip on the bolster.

Side mount.
Would suit a max of size 34 waist.
$200

20131130_194905_zpscd2e694e.jpg

_574_zps98da180a.jpg

2. HKS 3 inch exhaust
Came off a R33 GTST
Its a little banged up but does the job
$250

20140423_181544_zps7b9a8ef3.jpg

3. R33 2 door series 2 dash
good condition, no bubbling or cracks
$80

_575_zps6acb536c.jpg

4. RB20 engine mounts
Use these to get a RB in your S chassis!
$50

CAOC05%207%20ROWS%20OIL%20COOLER%20TANK%

5. 7 row oil cooler
brand new never used
AN10 fittings
$60

greddy.jpg

6. Greddy Informeter
tells you things like Speed, RPM, water temp, volts etc.
Plugs into OBD port
was installed on a R33
$120

20140423_181720_zpscecd9211.jpg

7. S15 front brake setup
lots of meat on pads and caliper. No lines, good upgrade for a R32 or even Stagea
$260

_57_zps35e59a29.jpg

_571_zps748267f6.jpg

_572_zps249a8d12.jpg

8. Custom made high mount manifold
steam pipe manifold
T4 flange and 4 bolt ext gate flange
Was made by a fabricator from Powertune many moons ago
never been used
$320

Negotable on everything, just want it outa here!

Happy to ship at buyers expense
Hoxton Park region
get me on 0490169671 (SMS preferred)
Adam.
Link to comment
https://www.sau.com.au/forums/topic/442238-nsw-shed-clear-out/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...