r311111 Posted July 29, 2014 Share Posted July 29, 2014 Part: rb25 complete head modified to suit rb30, front oil feed welded up, vct oil feed tapped recently recod has not been started since reco included 2 valves reseated, 2 cam cap threads drilled out and heli coiled and machining will also include braided line and speedflow fittings for oil feed.Condition: goodDescription: as aboveAsking Price: heads are going standard and complete for around the 300 mark i'll put 550 on this considering the line mods and reco.Part: RB25 head studsCondition: torqued down but motor never started all washers studs and nuts includedAsking Price: $200 Part: g reddy copy plenum, big throttle body and modified fuel rb25 fuel rail (standard fpr off and fitting to fit screw on braid line or rubber hose over to an aftermarket fpr) also sard (could be fake not sure) fpr with gaugeCondition: good as far as the eye can see Description: polished and coolAsking Price: $500 as the plenums alone are around the $400 markPart: RB25 mild steel high mount quality hybrid performance manifold with unknown external gateCondition: looks great afaik its been run on the car for less then 10mins before i got itDescription: will just fit a 35 40 with 4" front and 1.06 rear under a 31 bonnet with 3litre bottom end so fit perfectly on an rb25 in a 31 (shorter)Asking Price: $450Part: Hybrid performance gt35/40 1.06 rear and 4" inlet anti surge oil and water cooled (some braided lines incl)Condition: used for less then 10mins afaikDescription: very good very cool very big, handsome.Asking Price: $500Part: Z32 ecu nistune chipped to suit rb25 s1Condition: never used have reciept from UAS in Seven hills for around the 800 maek i think it wasDescription: NISTUNEANDDATAsking Price: $550Part: Wiring loom to suit s1 rb25 into r31 has it modified by a member on here i have never used it, will also include all rb25 s1 sensors a few of them brand new (o2 sensor, coolant temp sensor ect) also incl afm, knock sensors iac etc etc etc.Condition: good afaikDescription: wires and shitAsking Price: 350 because of some new sensors and the inclusion of allPart: 2 GMB brand new timing belt tensioners and timing belt to suit twin tensioner setup for 30det will also include timing belt to suitCondition: NEW NEW NEWDescription: spins.Asking Price: $150Part: RPM 4 puck clutch with heavy pressure plateCondition: very goodDescription: used to drive car in and out of workshop fora week Asking Price: $150Part: Monza GAYflamin mongrel catch canCondition: goodDescription: gayAsking Price: $30Part: Red aftermarket coilpacksCondition: never used dunno.Description: redAsking Price: $100Part: Brand new 400 x 300 2.5" inlet outlet coolerCondition: newDescription: shinyAsking Price: $100Part: 1 litre catch can with bosch 044Condition: Fatz said good nick when i purchased itDescription: roundAsking Price: $150WILL TAKE 2900 FOR THE WHOLE SETUPSelling as have decided to go big single cam setup.All parts located Penrith area Sydney NSW, sms on 0430248318 for details. Link to comment https://www.sau.com.au/forums/topic/446166-nsw-25-30-det-part-out-turbo-plenum-loom-044-head-cooler-manfold-clutch-ecu-etc/ Share on other sites More sharing options...
MrRx7s3 Posted July 29, 2014 Share Posted July 29, 2014 Plenum for neo or nah. Link to comment https://www.sau.com.au/forums/topic/446166-nsw-25-30-det-part-out-turbo-plenum-loom-044-head-cooler-manfold-clutch-ecu-etc/#findComment-7353074 Share on other sites More sharing options...
r311111 Posted July 29, 2014 Author Share Posted July 29, 2014 Nope, all normal rb25 gear. Link to comment https://www.sau.com.au/forums/topic/446166-nsw-25-30-det-part-out-turbo-plenum-loom-044-head-cooler-manfold-clutch-ecu-etc/#findComment-7353095 Share on other sites More sharing options...
r311111 Posted July 29, 2014 Author Share Posted July 29, 2014 Nistune Z32 ecu SOLD. GTR blow off valves have a pair $5o each. unkown condition doesnt come with adapters just bovs by themselves. Link to comment https://www.sau.com.au/forums/topic/446166-nsw-25-30-det-part-out-turbo-plenum-loom-044-head-cooler-manfold-clutch-ecu-etc/#findComment-7353661 Share on other sites More sharing options...
ROC-HRD Posted July 31, 2014 Share Posted July 31, 2014 I'll take the clutch setup text me on 0433367570 Link to comment https://www.sau.com.au/forums/topic/446166-nsw-25-30-det-part-out-turbo-plenum-loom-044-head-cooler-manfold-clutch-ecu-etc/#findComment-7354962 Share on other sites More sharing options...
r311111 Posted July 31, 2014 Author Share Posted July 31, 2014 Clutch unfortunately for you, fortunately for me, sold last night. Link to comment https://www.sau.com.au/forums/topic/446166-nsw-25-30-det-part-out-turbo-plenum-loom-044-head-cooler-manfold-clutch-ecu-etc/#findComment-7355567 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now