r311111

Clutch unfortunately for you, fortunately for me, sold last night.

Nistune Z32 ecu SOLD. GTR blow off valves have a pair $5o each. unkown condition doesnt come with adapters just bovs by themselves.

Nope, all normal rb25 gear.

Part: rb25 complete head modified to suit rb30, front oil feed welded up, vct oil feed tapped recently recod has not been started since reco included 2 valves reseated, 2 cam cap threads drilled out and heli coiled and machining will also include braided line and speedflow fittings for oil feed. Condition: good Description: as above Asking Price: heads are going standard and complete for around the 300 mark i'll put 550 on this considering the line mods and reco. Part: RB25 head studs Condition: torqued down but motor never started all washers studs and nuts included Asking Price: $200 Part: g reddy copy plenum, big throttle body and modified fuel rb25 fuel rail (standard fpr off and fitting to fit screw on braid line or rubber hose over to an aftermarket fpr) also sard (could be fake not sure) fpr with gauge Condition: good as far as the eye can see Description: polished and cool Asking Price: $500 as the plenums alone are around the $400 mark Part: RB25 mild steel high mount quality hybrid performance manifold with unknown external gate Condition: looks great afaik its been run on the car for less then 10mins before i got it Description: will just fit a 35 40 with 4" front and 1.06 rear under a 31 bonnet with 3litre bottom end so fit perfectly on an rb25 in a 31 (shorter) Asking Price: $450 Part: Hybrid performance gt35/40 1.06 rear and 4" inlet anti surge oil and water cooled (some braided lines incl) Condition: used for less then 10mins afaik Description: very good very cool very big, handsome. Asking Price: $500 Part: Z32 ecu nistune chipped to suit rb25 s1 Condition: never used have reciept from UAS in Seven hills for around the 800 maek i think it was Description: NISTUNEANDDAT Asking Price: $550 Part: Wiring loom to suit s1 rb25 into r31 has it modified by a member on here i have never used it, will also include all rb25 s1 sensors a few of them brand new (o2 sensor, coolant temp sensor ect) also incl afm, knock sensors iac etc etc etc. Condition: good afaik Description: wires and shit Asking Price: 350 because of some new sensors and the inclusion of all Part: 2 GMB brand new timing belt tensioners and timing belt to suit twin tensioner setup for 30det will also include timing belt to suit Condition: NEW NEW NEW Description: spins. Asking Price: $150 Part: RPM 4 puck clutch with heavy pressure plate Condition: very good Description: used to drive car in and out of workshop fora week Asking Price: $150 Part: Monza GAYflamin mongrel catch can Condition: good Description: gay Asking Price: $30 Part: Red aftermarket coilpacks Condition: never used dunno. Description: red Asking Price: $100 Part: Brand new 400 x 300 2.5" inlet outlet cooler Condition: new Description: shiny Asking Price: $100 Part: 1 litre catch can with bosch 044 Condition: Fatz said good nick when i purchased it Description: round Asking Price: $150 WILL TAKE 2900 FOR THE WHOLE SETUP Selling as have decided to go big single cam setup. All parts located Penrith area Sydney NSW, sms on 0430248318 for details.

Kiwi rs4t that sounds like exactly what i'm hoping to do ! thanks, i have been waiting for thread like this to come up haha. Superben, Surprisingly the motor looks brand new, the car has been serviced at a max interval of 7,000km's since new and everything that can be seen looks great.

was thinking around the 350+ mark, doesn't necessarily mean rocking up to im240 running 30 pound and expecting to pass though.. But in saying that, showing up with a setup that is well capable of much bigger power but doesn't veer off the photo's and parts listed on the engineers report.

currently building one using the 300k+ block that's already in the car ( seems to be in perfect condition surprisingly so have all my 30's other then one having f**ked vss ) and if i'm feeling adventurous highly unlikely though as i am a lazy flamin mongrel who hates to lay on the floor other then to sleep, the sump will be coming off to throw some bearings in it and to bump up the oil pressure up (lack of driveway). almost together and consists of gt35/40 cheapie on a decent high mount and external gate 3.5' superdragger i think ebay plenum 660cc injectors decent cooler 2.5" piping z32 afm ( thinking about going the r35 route thoughts ? ) decent cooler stock 25det head tidied up and modified for vct arp studs stock head gasket not genuine nissan hdi boost controller twin tensioners side by side ebay oil cooler external bosch 044 with surge alloy rad genuine nissan thermostat cheapie catch can to do the catching mx7/33box with 4 puck clutch thinking about limiting it to 6.5 k rpm with the 300k old bearings and stock oil pump or around the 7 mark if i can be arsed to change the bearings. hoping to pound it with 20psi and am hoping for just over the 300 mark, thoughts ?

hate to be a pain but i really can't be arsed looking through 90+ pages of thread after already looking through quite a few, but has anybody else passed the im240 in NSW easily with big setups ? thanks.

Bump.. Love to see it gone so i can get to my shit.

Hi guys, have for sale a MX7 gearbox out of a vl Turbo. Unknown condition, guy i got it off had it behind a non turbo rb30de said it was fine but the clutch. Thrust bearing needed changing (which should be changed with a new box anyway) Sold as is, selling it as unknown as i haven't used it personally so no refunds etc. all i have is the last guys word. I'd recommend putting some nice light oil in it and a new thrust bearing. Give me a call on or text on 0430248318. $900 willing to take offers!

Item- Z32 ecu with nistune board to suit RB25det. Reason for selling- thinking about going for something that deletes afm. Ok, so basically have this ecu and if i can find it also have the reciept from Unique Auto Sports aswell who fitted the nistune and modded the ecu for around the $800 mark i think. Hasn't been used since. Located in Penrith Western Sydney and can meet buyer around the area if needed. After $600 ono.

Bump

Also have a jecs z32 afm with plug, $120 previous owner removed due to defect.

My mistake, they are genuine jecs.

Price is for 6 btw.

Up for sale never used still fully vac sealed in plastic with oil (as never to seize) 6x's 660cc high flowed injectors, direct fit in and plug in for sr20 rb25 etc etc, same as the ones on ebay for $400 + $15 delivery, bought these but am looking at going 900's for my application. Not really negotiable as they have not even been removed from packaging, already will be out $25 . Any questions sms me on 0430248318 would prefer postage as i work nights and it makes it hard to organise pickup during the day (sleeping) at night (working).

I'm having the same trouble, but i pulled the bolts out myself haha. Any 10mm bolt should be fine, as long as the cover doesn't move when the bolts are in, if it does just throw a small flat washer behind them so they don't tighten up through the rubber and you should be fine and not have any timing belts snap in half.

Bump.

Injectors and afm sold.

Got some what i "think" are s15 injectors Heres the description i put on e bay You are bidding on 6 what are thought to be s15 480cc injectors, i was unsure on what injectors these were so had one flow tested at 450cc i assume these are s15's because they don't become 480 without a fuel pressure bump up. So the risk is on you, but that's what they flow tested at well one did. The injectors are used and in unknown condition, although the previous owner told me they were fine. These injectors share the same nissan plug and bolt and plug up to rb25's etc etc, should be good for around 280rwkw's in a 6cyl if they are s15's of course. Note, some of the pintle caps are different and the top part of some injectors have very very small gouges from pulling the stubborn injectors out of the rail, these WILL NOT effect usage. After $150 for these bad boys, upgraded to 660's. Q45 air flow metre, big mother, bought from ebay assumed it was new but wasn't used but in perfect working order according to the previous owner so it's all on you no plug incl. $150 negltiable for that bad boy. Oil filter sandwhich plate brand new with oil cooler line provisions in -an 10 size, also has 2 provisions for oil pressure switches in standard thread should fit rb's and nissan's alike comes with 2 fittings one in 3/4 which is z145's i think and the other is m20x1.5 which i think will fit sr's etc. After $30 Next up brand new 7 row oil cooler brand new never used also -an10 $70 Throw me a text on 0430248318 for pics, located in Penrith NSW.

As above. Thanks. Located in Glenmore Pk sydney.

Pm sent

Sold

Item: R32 front and rear calipers Condition: good (new pads apparently) rotors might need a machine. Description: r32 front and rear calipers (could be 33 fronts will check when the car gets here) Price: will swap for hr31 floating hub struts and r33 non turbo calipers with the good bolt spacing! Or $500 for the lot front and rear with pads rotors and lines. Pick-up/Postage Arrangements: Post at buyers expense Location: Penrith nsw Contact Details: text 0430248318

Deposit taken, sold in 10 minutes.