Jump to content
SAU Community

Recommended Posts

FOR SALE – BRAND NEW BOLT ON TURBOCHARGER AND KIT FOR S14/S15 SR20

PACKAGE PRICE - $1600 for quick sale

PM me for details or reply to this thread and ill PM you.

BRAND NEW TURBO! RRP $1699

(I purchased lines and fittings for $200 cost me over $2000 all up and practically giving away stuff to clear out the shed)

Billet D-GTA (56 Trim) Turbocharger

Turbocharger rated by manufacturer - 300hp to 480hp

Compressor wheel

Billet-D, Inducer 53.1mm, Major 71mm. 56 trim.

Compressor cover
Billet-B .60 A/R, 3” inlet, 2” outlet.

Turbine wheel
Billet-GTA. Major 53.8mm, Exducer 47mm.

Turbine exhaust housing
GT28 Open .64 A/R
Includes Bracket, 19psi Actuator can, rod and flap assembled.

**Turbocharger has been modified by billet (MTA) for increased oil cooling

***Billet turbochargers and MTA are same company

www.billetturbochargers.com

Reason for sale:

I changed direction with my S15 build, new engine in the mix and went to a bigger T3 series turbo and oil feed filter this time.

This turbo is perfect for a fast street car or track work!

Due to the ballbearing system, the transient response and spool up is brilliant.

Has potential for upwards of a responsive 260+ rwkw on a silvia with supporting mods (which I was aiming for)

About this product:

I have had this turbo on my car for 4000 kms. It was then rebuilt they reused housings cleaned and made made as new, but brand new CHRA, new internals, including new compressor and exhaust wheels, larger oil cooling and optimized design

This turbo performs VERY well, I believe it spools up faster than Garrett GT2871.

on full song – 20psi before 3800rpm,

Custom made Billet turbocharger by billetturbochargers (http://www.mtaturbo.com)

Just need a 3” intake also highly recommended, as stock air pipe will suck its self shut and a 2”elbow to connect turbo to hot pipe. Autobarn or pirtek (cheaper) u can source these elbows.

(Turbo got remade as I must have had some crap in the engine and caused blockage to the turbo causing it to overheat, billetturbochargers (MTA) replaced the old turbo free of charge with a whole new unit with modifications to the CHRA for additional cooling as I had a concern with it. Includes a new modified oil restrictor which fits inside oil feed line at turbo feed side)

Additional items included in this sale:

Xforce Split Dump pipe – dremel modified to suit this turbo waste gate flap.

Oil feed line

Oil return line

2xm14 bolts for water deletion (S15)

Gasket kit for turbo to manifold installation

Note:

Reuse your stock manifold, turbo exhaust studs, and follow all instructions by MTA in box.

See pix of turbo, I will add other pix when I can get to my olds place to take some.

post-17056-0-01138800-1411871149_thumb.jpg

post-17056-0-51785600-1411871165_thumb.jpg

post-17056-0-93780100-1411871167_thumb.jpg

post-17056-0-97168400-1411871169_thumb.jpg

post-17056-0-35894000-1411871172_thumb.jpg

post-17056-0-44025200-1411871174_thumb.jpg

post-17056-0-66404700-1411871176_thumb.jpg

post-17056-0-55255300-1411871178_thumb.jpg

  • 2 weeks later...

price drop !!!!!!!!!! $1400 for everything - I Want It Gone!

its a brand new turbo and kit for bolt on application for s15 - just need the intake pipe 3" and a 2" silicon 90d bend for the compressor outlet.

included in the Kit

Billet Turbochargers D-GTA 56trim (480hp rated turbo - new)

bolts for blocking water jacket and brass washers.

s15 xforce dump pipe (used)

oil feed line (used for 4000kms)

oil return line (used for 2000kms)

and random gaskets that i didnt use - its a $20 MTQ Soniq gasket kit i used.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...