Jump to content
SAU Community

Recommended Posts

Selling as I am planning on buying a smaller car.I am the 1st Australian owner of this Nissan Stagea ARX which was bought in October 2010 from Northshore Prestige who always sold the best examples of this car with a genuine(checked) 68716 kms on the clock. I had the car professionally inspected prior to purchase and the car was in A1 condition for the age & kms travelled. I am a mature owner and this car has been an amazing family wagon for the last 4 years. There are no local wagons sold which match this car for performance, luxury and practicality. The car has been very well maintained with 6 month service intervals using top quality fluids. The rocker cover gaskets and battery were replaced in 2011 and the radiator was replaced in 2012. The standard suspension was replaced with height and damper adjustable BC coilovers last year(setup by Heasmans suspension) and at the same time the front balljoints and cv boots were replaced. The standard turbo was getting very noisy so last year this was replaced by a rebuilt Precision Turbochargers SS1 highflow turbo which is much more durable than the original turbo. The turbo is now nearly silent as it should be. If you look at a M35 Stagea that has not had the original turbo replaced and you can hear a loud turbo whistle when the car is on boost expect the turbo to fail in the near future as the original turbos always do on these cars. Along with a full custom 3" exhaust this has given what was already a very quick car a decent amount of extra power and torque even running standard boost levels. The car was dynoed after these mods and made 187kw atw with perfect afrs and 15psi boost. This would be over 250kw at the engine. The brakes have been upgraded with high performance pads(I will include the original pads too) and the original battery has been replaced with a new high capacity one. The car has been fitted with Prorack roof racks & these are included in the sale but the Thule bike racks in the photos are not being sold. The interior is standard apart from a turbosmart boost gauge and a Kenwood cd player that has replaced the standard built in Japanese system. The car has full factory floor mats and a cargo liner and the original carpet is unmarked and the leather seats are in good condition. The car is very comfortable and has electric everything including heated seats and everything works as it should. The lights are auto hid. For extra security the car has been fitted with a high quality Autowatch immobiliser with central locking. Any inspection is welcome and the car is being listed at a bargain price below redbook value despite the genuine low kms and thousands of $ worth of quality modifications as I am ready to buy a new car. Matt 0413049970.

I will add photos over the weekend but for now please check out my Carsales ad if interested-

http://www.carsales.com.au/private/details/Nissan-Stagea-2001/SSE-AD-3272912/?Cr=0

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...