Jump to content
SAU Community

WSID wed 14/7/04

BOO57A

By BOO57A,
in Events Archive

 Share

Recommended Posts

siksII Grand Master

siksII

Posted
Posted

BOOSTD: wrxhoon's name is jerry ;) and his best times were 12.07(pretty sure) but i know he ran 12.1.. apparently his last run was shit (after i left) so u must have seen that :D

terminal speed was 120mph on his best run, but with a crappy 2.0something 60 foot time, so could be a lot faster!

That m coupe was crazy! sounded good...and backed it up :)

wrxhoon Grand Master

wrxhoon

Posted
Posted
BOOSTD: wrxhoon's name is jerry ;) and his best times were 12.07(pretty sure) but i know he ran 12.1.. apparently his last run was shit (after i left) so u must have seen that :rofl:

terminal speed was 120mph on his best run, but with a crappy 2.0something 60 foot time, so could be a lot faster!

That m coupe was crazy! sounded good...and backed it up ;)

yea you are right arup best time was 12.069 @120.24 mph and 2.017 60 ft

that was the run i had with bill ( butthead ) he ran [email protected] mph and 1.866 60 ft .

bill ran 12.1 on his last run .

on my last run i got a good start 1.873 60 ft but then hit the cutout anded up running 12.333 @115.89 mph

on an earlier run i did 12.157 @119.87 mph and 2.089 60 ft ( bogged down on that run not enough rpm and dropped the clutch to quick .

it was much easier to take off with the smaller turbos .

it must have been very slippery today though , mick could only get 2.0 6o ft ,

last time we went he got 3 runs 1.8.. , 1.8.. and 1.7...

ah well i'm goping to have another go at 11 pass sometime in the near future ( went so close today i'm sure i'll get it )

siksII Grand Master

siksII

Posted
Posted

next time u will hopefully get the 11 sec pass, it is a definite possibility...coming down to the launch and how slippery it is i guess!! it was great to watch, cant wait to have a run myself (when i actually get another car!)

BOO57A Rising Star

BOO57A

Posted
  • Author
Posted

Im not even going to bother saying what i got other than pissed off with numerous things. Good thing u didnt come up jase was a waste of time. Organisation was shit and i arived at 3:30 and only got 2 runs after 2.5 hours in the scrutineering line. what a ****ing joke!!!!!!!

One good thing was that I had a few words with the events co ordinator and also with Jim Reid himself and let them in on a few problems going on in the night that with some work could improve things for everyone in the future. Heres hoping it does!!!!

I guess ill just have to wait till the next street meet and see if anything changes.

Cheers

Scott.

 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Front facing Intercooler

      By GTSBoy · Posted

      In Vic it would be a defect regardless of whether or not you cut a hole in the sheetmetal for the return pipe. The rules in Vic are shitful, and are generally interpreted as you can "make 2 mods to the intake system". Putting an FFP and an FMI onto it will almost certainly be seen as some huge number of intake mods. You really need to speak to an engineer before doing this stuff in VIC.
    • BuiltNotBought
      Looking for mechanic/tuner

      By BuiltNotBought · Posted

      planning a r34 rb25 de+t with some other work, rather just have it done in a shop due to space limitations any recommendations? I have most the parts already I seen online Moore Performance and DR Drift any advice appreciated thanks 
    • BuiltNotBought
      Front facing Intercooler

      By BuiltNotBought · Posted

      I’ve read the previous posts so just looking for latest information on how people have dealt with front facing plenum is it a defect etc or didn’t pass roadworthy or was it not noticed? Have a r34 and deciding if I should make a hole on the driver side or not.  I know some people have said blitz return flow but I might get rid of the stock intake down the line for a plenum so I rather set up for that now plus I already have a standard Intercooler. Car is mainly stock  Thanks. 
    • GTSBoy
      American owner: what scanner for JOBD port?

      By GTSBoy · Posted

      Actually, if having and keeping the stock ECU is the plan, the correct answer is to put Nistune into the ECU and improve the situation, not just look at it.
    • Duncan
      NSW: Any Q or V going to this event

      By Duncan · Posted

      Wrong side of sydney for me coming from Goulburn, but you should head along, all ages of Skylines will be very welcome
×
×
  • Create New...