Jump to content
SAU Community

Recommended Posts

Mostly, R33/R34 GTR RB26DETT parts for sale unless otherwise noted. Some parts will fit R32 and R34. Please do your own research to confirm. Pics available. No guarantees written or implied. Located in So Cal. Paypal plus 3.5%. Pick up ok. Buyer pays shipping. Check USPS.com flat rate boxes for shipping estimates. Prices are in USD. Thanks for looking.

1) Cusco Hicas eliminator aka delete $264; new

2) Attain Hicas eliminator aka delete $49; new

3) Exedy triple clutch r33 $1695; new

4) Ogura triple clutch r33 1000F; needs new plates $595; used

5) TRUST GREDDY SPEC-R HG FMIC KIT BCNR33 TWIN ENTRY TYPE 27 CORE; H302/L710/W1 #12020440 $1795; new

6) APEXi N1 Drag Dampers Coilover; Apexi remanufactured now in new condition $1795; like new

7) Brembo 2-piece 343mm front rotors (pair) for F50 Big Brake Kit $976; used

8) APEXi Super Brake Rotors for factory r33/r34 Skyline GTR rear calipers, Cross drilled and slotted w/free new Apexi brake pads $275; new

9) Non-VSPEC R33 GTR Rear Subframe and non-hydraulic mechanical R200 differential $690; used

10) Seibon CF R33 Jun style hood $648; used

11) Greddy non-vspec rear diff cover $296; new

12) Mahle Pistons; no rings included $995; new

13) APEXi N1 PRO Dampers Coilover #263AN009; Apexi remanufactured now in new condition $1795; like new

14) Tomei 290 11.5 #1421 290115 r34 GTR camshafts (pair) $413; new

15) 2.8 Stroker Kit: HKS Step 2 forged pistons 87mm, Carillo Pro-H connecting rods, Crower.com (not BC) crankshaft; excellent condition, low miles $3495; used

16) Factory OEM Genuine r33 gtr wheels Falken good tires $995; used

17) r34 garage saurus cf ground effect (side skirts, front diffuser, rear spats); has cracks; see pics $495; used

18) r34 top secret frp hood $562; used

19) r34 oem cf rear vspec diffuser $450; used

20) r34 N1 Race Super Taikyu cf reinforced front bumper with diffuser $450; used

21) r34 rear trunk lid (damaged, someone tried to pry open trunk) $45; used

22) r34 nismo white face gauge cluster 320km $395; used

23) r34 gtr xenon passenger LH headlight with Signal Auto hi-beam air duct mod w/free eye brow/lids uninstalled $150; used

24) r34 exedy triple clutch #NM053SR $1695; new

25) r33 front bumper support reinforcement bar $45; used

26) Lexus SC300 leather steering wheel with airbag $75; used

27) PFC 7778.01.20.44 Race Compound 01 Pad 20mm Carbon Metallic front brake pads for Endless, AP, Alcon 6-POT BBK big brake kit $240; used

28) Endless Matador Series MA22B Brake Pads for Endless, AP, Alcon 6-POT BBK big brake kit RCP052MA22B $195; new

29) HKS T51R SPL full turbo kit (turbine, shield, manifold, wastegate, downpipe aka front pipe, intake pipe w/filter, screamer pipe) $5250; used

30) r34/r33/r32 gtr front wheel bearings (front pair) $135; new

31) r33 signal auto drag spoiler $535; used

32) Veilside race intake plenum aka manifold aka surge tank with throttle body $1595; used

33) Apexi drag core 4 row intercooler, estimated measurements of 140mm thick, 80mm turbo side, 100mm intake side $1495; used

34) Hawk Brake pads HB180 HPS .591 for factory r33/r34 Skyline GTR rear calipers Ferro Carbon Street compound $69; new

35) Hawk Brake pads HB209F .583 for Honda Civic HPS compound $44; new

2.8 Stroker: HKS Step 2 forged pistons 87mm, Carillo Pro-H connecting rods, Crower.com (not BC) crankshaft; excellent condition, low miles

post-62118-14351567478548_thumb.jpg

post-62118-14351567648972_thumb.jpg

post-62118-1435156785239_thumb.jpg

post-62118-14351568128416_thumb.jpg

post-62118-143515683734_thumb.jpg

post-62118-14351568640424_thumb.jpg

post-62118-14351568754515_thumb.jpg

1) Cusco Hicas eliminator aka delete; new

post-62118-14351573062503_thumb.jpg

14) Tomei 290 11.5 #1421 290115 r34 GTR WPC treated camshafts (pair); new

post-62118-14351573739838_thumb.jpg

21) r34 rear trunk lid (damaged, someone tried to pry open trunk); used

post-62118-14351574659663_thumb.jpg

29) HKS T51R SPL full turbo kit (turbine, shield, manifold, wastegate, downpipe aka front pipe, intake pipe w/filter, screamer pipe), low miles; used

post-62118-14351575612745_thumb.jpg

post-62118-14351575927395_thumb.jpg

post-62118-1435157605178_thumb.jpg

post-62118-14351576177953_thumb.jpg

post-62118-14351576316771_thumb.jpg

post-62118-14351576557457_thumb.jpg

8) APEXi Super Brake Rotors for factory r33/r34 Skyline GTR rear calipers, Cross drilled and slotted w/free new Apexi brake pads; new

post-62118-14351579352771_thumb.jpg

9) Non-VSPEC R33 GTR Rear Subframe and non-hydraulic mechanical R200 differential; used

post-62118-14351580075695_thumb.jpg

post-62118-14351580218338_thumb.jpg

Can u also send pics for #20 front bar fit mistaken for 21 thanks

20) r34 N1 Race Super Taikyu cf reinforced front bumper with diffuser; used

post-62118-14353058478262_thumb.jpg

post-62118-14353058588011_thumb.jpg

post-62118-14353058693184_thumb.jpg

  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 3 weeks later...

Updated list and prices (USD):

1) Cusco Hicas eliminator aka delete $264; BNIB

2) Attain Hicas eliminator aka delete $49; BNIB

3) Exedy triple clutch r33/r32 push; NM033HRWH, $OLD; BNIB

4) Ogura triple clutch r33/r32 push 1000F; needs new plates $595; used

5) TRUST GREDDY SPEC-R HG FMIC KIT BCNR33 TWIN ENTRY TYPE 27 CORE; Notes:

R spec Intercooler, dim: 294x710x165mm (largest GReddy core), Inlet 70mm x 2, 100mm outlet, #12020440 ($2800 msrp) $OLD; BNIB

6) APEXi N1 r33/r34 Pro Drag racing Adjustable Dampers Coilover; Apexi remanufactured now in new condition ($2500 msrp) $1495

7) Brembo 2-piece 343mm front rotors (pair) for F50 Big Brake Kit $976; used

8) APEXi Super Brake Rotors #278-nr10 for factory r33/r34 Skyline GTR rear calipers, Cross drilled and slotted w/free new Apexi brake pads $275; BNIB

9) Non-VSPEC R33 GTR Rear Subframe and non-hydraulic mechanical R200 differential $690; used

10) Seibon CF R33 Jun style hood $648; used

11) Greddy non-vspec rear diff cover $296; BNIB

12) Mahle Pistons; no rings included $995; BNIB

13) APEXi N1 r33/r34 PRO Adjustable Dampers Coilover for circuit/track/street #263AN009; Apexi remanufactured now in new condition ($2500 msrp) $1495

14) Tomei 290 11.5 #1421 290115 r34 GTR WPC treated camshafts (pair) $OLD; BNIB

15) 2.8 Stroker Kit: HKS Step 2 forged pistons 87mm, Carillo Pro-H connecting rods, Crower.com (not BC) crankshaft; excellent condition, low miles $2995; used

16) Factory OEM Genuine r33 gtr wheels Falken good tires $OLD; used

17) r34 garage saurus cf ground effect (side skirts, front diffuser, rear spats); has cracks; see pics $OLD; used

18) r34 top secret frp hood $562; used

19) r34 oem cf rear vspec diffuser $OLD; used

20) r34 N1 Race Super Taikyu cf reinforced front bumper with diffuser $450; used

21) r34 rear trunk lid (damaged, someone tried to pry open trunk) $45; used

22) r34 nismo white face gauge cluster 320km $OLD; used

23) r34 gtr xenon passenger LH headlight with Signal Auto hi-beam air duct mod w/free eye brow/lids uninstalled $OLD; used

24) r34 exedy triple clutch #NM053SR $1495; BNIB

25) r33 front bumper support reinforcement bar $45; used

26) Lexus SC300 leather steering wheel with airbag $75; used

27) PFC 7778.01.20.44 Race Compound 01 Pad 20mm Carbon Metallic front brake pads for Endless, AP, Alcon 6-POT BBK big brake kit $240; like new

28) Endless Matador Series MA22B Brake Pads for Endless, AP, Alcon 6-POT BBK big brake kit RCP052MA22B $OLD; BNIB

29) HKS T51R SPL full turbo kit (turbine, shield, manifold, wastegate, downpipe aka front pipe, intake pipe w/filter, screamer pipe) $3995; used

30) r34/r33/r32 gtr front wheel bearings (front pair) $OLD; BNIB

31) r33 signal auto drag spoiler $535; used

32) Veilside race intake plenum aka manifold aka surge tank with throttle body $1595; used

33) Apexi drag core 4 row intercooler, estimated measurements of 140mm thick, 80mm turbo side, 100mm intake side $1495; used

34) Hawk Brake pads HB180 HPS .591 for factory r33/r34 Skyline GTR rear calipers Ferro Carbon Street compound $OLD; new

35) Hawk Brake pads HB209F .583 for Honda Civic HPS compound $44; new

36) Centric standard brake rotors #121.42013 for 1990-1992 Infiniti M30 $39 for the pair; bnib

Edited by ocskyline
  • 2 weeks later...
  • 2 weeks later...

Rear Subframe and Greddy diff cover sold.

New pics of 2.8 Stroker $2995:

post-62118-1443566451563_thumb.jpg

R33 GTR strut bar $95:

post-62118-14435664950562_thumb.jpg

Brembo 332mm 2-PC rotors $995

post-62118-14435665313824_thumb.jpg

post-62118-14435669833511_thumb.jpg

USD. Located in California USA

  • 2 weeks later...

Some parts left. Added new stuff. New prices:

Massive skyline parts for sale

Mostly, R32/R33/R34 skyline GTR RB26DETT parts for sale unless otherwise noted. More Pics available. No guarantees written or implied. Located in So Cal USA. Paypal plus 4%. Pick up ok. Buyer pays shipping. Check USPS.com flat rate boxes for shipping estimates. Prices are in USD. Thanks for looking.

BNIB = brand new in box

1)Cusco Hicas eliminator aka delete $old; BNIB

2)Attain Hicas eliminator aka delete $49; BNIB

3)Exedy triple clutch r33/r32 push; NM033HRWH, $OLD; BNIB

4)Ogura triple clutch r33/r32 push 1000F; needs new plates $595; used

5)TRUST GREDDY SPEC-R HG FMIC KIT BCNR33 TWIN ENTRY TYPE 27 CORE; Notes:

R spec Intercooler, dim: 294x710x165mm (largest GReddy core), Inlet 70mm x 2, 100mm outlet, #12020440 ($2800 msrp) $OLD; BNIB

6) APEXi N1 r33/r34 Pro Drag racing Adjustable Dampers Coilover; Apexi remanufactured now in new condition ($2500 msrp) $1195

7)Brembo 2-piece 332mm = 13" front rotors (pair) for F50 Big Brake Kit $850; used

8)APEXi Super Brake Rotors #278-nr10 for factory r33/r34 Skyline GTR rear calipers, Cross drilled and slotted w/free new Apexi brake pads $275; BNIB

9)Non-VSPEC R33 GTR Rear Subframe and non-hydraulic mechanical R200 differential $old; used

10)Seibon CF R33 Jun style hood $599; used

11)Greddy non-vspec rear diff cover $old; BNIB

12)Mahle Pistons; no rings included $695; BNIB

13)APEXi N1 r33/r34 PRO Adjustable Dampers Coilover for circuit/track/street #263AN009; Apexi remanufactured now in new condition ($2500 msrp) $1195

14)Tomei 290 11.5 #1421 290115 r34 GTR WPC treated camshafts (pair) $OLD; BNIB

15)2.8 Stroker Kit: HKS Step 2 forged pistons 87mm, Carillo Pro-H connecting rods, Crower.com (not BC) crankshaft; excellent condition, low miles $2995; used

16)Factory OEM Genuine r33 gtr wheels Falken good tires $OLD; used

17)r34 garage saurus cf ground effect (side skirts, front diffuser, rear spats); has cracks; see pics $OLD; used

18)r34 genuine top secret frp hood $499; used

19)r34 oem cf rear vspec diffuser $OLD; used

20)r34 N1 Race Super Taikyu cf reinforced front bumper with diffuser $450; used

21)r34 rear trunk lid (damaged, someone tried to pry open trunk) $45; used

22)r34 nismo white face gauge cluster 320km $OLD; used

23)r34 gtr xenon passenger LH headlight with Signal Auto hi-beam air duct mod w/free eye brow/lids uninstalled $OLD; used

24)r34 exedy triple clutch #NM053SR $1395; BNIB

25)r33 front bumper support reinforcement bar $45; used

26)Lexus SC300 leather steering wheel with airbag $75; used

27)PFC 7778.01.20.44 Race Compound 01 Pad 20mm Carbon Metallic front brake pads for Endless, AP, Alcon 6-POT BBK big brake kit $199; like new

28)Endless Matador Series MA22B Brake Pads for Endless, AP, Alcon 6-POT BBK big brake kit RCP052MA22B $OLD; BNIB

29)HKS T51R SPL full turbo kit (turbine, shield, manifold, wastegate, downpipe aka front pipe, intake pipe w/filter, screamer pipe) $OLD; used

30)r34/r33/r32 gtr front wheel bearings (front pair) $OLD; BNIB

31)r33 signal auto drag spoiler $399; used

32)Veilside race intake plenum aka manifold aka surge tank with throttle body $1395; used

33)Apexi drag core 4 row intercooler, estimated measurements of 140mm thick, 80mm turbo side, 100mm intake side $1395; used

34)Hawk Brake pads HB180 HPS .591 for factory r33/r34 Skyline GTR rear calipers Ferro Carbon Street compound $OLD; new

35)Hawk Brake pads HB209F .583 for Honda Civic HPS compound $44; new

36) Centric standard brake rotors #121.42013 for 1990-1992 Infiniti M30 $39 for the pair; bnib

37) r33 GTR strut tower bar $95; used

38) r33 GTR rear seats $95; used

39) oem Pistons set from 1999 r34 GTR vspec, $150; used, one damaged

40) Hks version ati race damper #916060 (hks pulleys not included), $399, used

Pics:

http://orangecounty.craigslist.org/pts/5266380567.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...