Jump to content
SAU Community

Recommended Posts

Mostly, R33/R34 GTR RB26DETT parts for sale unless otherwise noted. Some parts will fit R32 and R34. Please do your own research to confirm. Pics available. No guarantees written or implied. Located in So Cal. Paypal plus 3.5%. Pick up ok. Buyer pays shipping. Check USPS.com flat rate boxes for shipping estimates. Prices are in USD. Thanks for looking.

1) Cusco Hicas eliminator aka delete $264; new

2) Attain Hicas eliminator aka delete $49; new

3) Exedy triple clutch r33 $1695; new

4) Ogura triple clutch r33 1000F; needs new plates $595; used

5) TRUST GREDDY SPEC-R HG FMIC KIT BCNR33 TWIN ENTRY TYPE 27 CORE; H302/L710/W1 #12020440 $1795; new

6) APEXi N1 Drag Dampers Coilover; Apexi remanufactured now in new condition $1795; like new

7) Brembo 2-piece 343mm front rotors (pair) for F50 Big Brake Kit $976; used

8) APEXi Super Brake Rotors for factory r33/r34 Skyline GTR rear calipers, Cross drilled and slotted w/free new Apexi brake pads $275; new

9) Non-VSPEC R33 GTR Rear Subframe and non-hydraulic mechanical R200 differential $690; used

10) Seibon CF R33 Jun style hood $648; used

11) Greddy non-vspec rear diff cover $296; new

12) Mahle Pistons; no rings included $995; new

13) APEXi N1 PRO Dampers Coilover #263AN009; Apexi remanufactured now in new condition $1795; like new

14) Tomei 290 11.5 #1421 290115 r34 GTR camshafts (pair) $413; new

15) 2.8 Stroker Kit: HKS Step 2 forged pistons 87mm, Carillo Pro-H connecting rods, Crower.com (not BC) crankshaft; excellent condition, low miles $3495; used

16) Factory OEM Genuine r33 gtr wheels Falken good tires $995; used

17) r34 garage saurus cf ground effect (side skirts, front diffuser, rear spats); has cracks; see pics $495; used

18) r34 top secret frp hood $562; used

19) r34 oem cf rear vspec diffuser $450; used

20) r34 N1 Race Super Taikyu cf reinforced front bumper with diffuser $450; used

21) r34 rear trunk lid (damaged, someone tried to pry open trunk) $45; used

22) r34 nismo white face gauge cluster 320km $395; used

23) r34 gtr xenon passenger LH headlight with Signal Auto hi-beam air duct mod w/free eye brow/lids uninstalled $150; used

24) r34 exedy triple clutch #NM053SR $1695; new

25) r33 front bumper support reinforcement bar $45; used

26) Lexus SC300 leather steering wheel with airbag $75; used

27) PFC 7778.01.20.44 Race Compound 01 Pad 20mm Carbon Metallic front brake pads for Endless, AP, Alcon 6-POT BBK big brake kit $240; used

28) Endless Matador Series MA22B Brake Pads for Endless, AP, Alcon 6-POT BBK big brake kit RCP052MA22B $195; new

29) HKS T51R SPL full turbo kit (turbine, shield, manifold, wastegate, downpipe aka front pipe, intake pipe w/filter, screamer pipe) $5250; used

30) r34/r33/r32 gtr front wheel bearings (front pair) $135; new

31) r33 signal auto drag spoiler $535; used

32) Veilside race intake plenum aka manifold aka surge tank with throttle body $1595; used

33) Apexi drag core 4 row intercooler, estimated measurements of 140mm thick, 80mm turbo side, 100mm intake side $1495; used

34) Hawk Brake pads HB180 HPS .591 for factory r33/r34 Skyline GTR rear calipers Ferro Carbon Street compound $69; new

35) Hawk Brake pads HB209F .583 for Honda Civic HPS compound $44; new

2.8 Stroker: HKS Step 2 forged pistons 87mm, Carillo Pro-H connecting rods, Crower.com (not BC) crankshaft; excellent condition, low miles

post-62118-14351567478548_thumb.jpg

post-62118-14351567648972_thumb.jpg

post-62118-1435156785239_thumb.jpg

post-62118-14351568128416_thumb.jpg

post-62118-143515683734_thumb.jpg

post-62118-14351568640424_thumb.jpg

post-62118-14351568754515_thumb.jpg

1) Cusco Hicas eliminator aka delete; new

post-62118-14351573062503_thumb.jpg

14) Tomei 290 11.5 #1421 290115 r34 GTR WPC treated camshafts (pair); new

post-62118-14351573739838_thumb.jpg

21) r34 rear trunk lid (damaged, someone tried to pry open trunk); used

post-62118-14351574659663_thumb.jpg

29) HKS T51R SPL full turbo kit (turbine, shield, manifold, wastegate, downpipe aka front pipe, intake pipe w/filter, screamer pipe), low miles; used

post-62118-14351575612745_thumb.jpg

post-62118-14351575927395_thumb.jpg

post-62118-1435157605178_thumb.jpg

post-62118-14351576177953_thumb.jpg

post-62118-14351576316771_thumb.jpg

post-62118-14351576557457_thumb.jpg

8) APEXi Super Brake Rotors for factory r33/r34 Skyline GTR rear calipers, Cross drilled and slotted w/free new Apexi brake pads; new

post-62118-14351579352771_thumb.jpg

9) Non-VSPEC R33 GTR Rear Subframe and non-hydraulic mechanical R200 differential; used

post-62118-14351580075695_thumb.jpg

post-62118-14351580218338_thumb.jpg

Can u also send pics for #20 front bar fit mistaken for 21 thanks

20) r34 N1 Race Super Taikyu cf reinforced front bumper with diffuser; used

post-62118-14353058478262_thumb.jpg

post-62118-14353058588011_thumb.jpg

post-62118-14353058693184_thumb.jpg

  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 3 weeks later...

Updated list and prices (USD):

1) Cusco Hicas eliminator aka delete $264; BNIB

2) Attain Hicas eliminator aka delete $49; BNIB

3) Exedy triple clutch r33/r32 push; NM033HRWH, $OLD; BNIB

4) Ogura triple clutch r33/r32 push 1000F; needs new plates $595; used

5) TRUST GREDDY SPEC-R HG FMIC KIT BCNR33 TWIN ENTRY TYPE 27 CORE; Notes:

R spec Intercooler, dim: 294x710x165mm (largest GReddy core), Inlet 70mm x 2, 100mm outlet, #12020440 ($2800 msrp) $OLD; BNIB

6) APEXi N1 r33/r34 Pro Drag racing Adjustable Dampers Coilover; Apexi remanufactured now in new condition ($2500 msrp) $1495

7) Brembo 2-piece 343mm front rotors (pair) for F50 Big Brake Kit $976; used

8) APEXi Super Brake Rotors #278-nr10 for factory r33/r34 Skyline GTR rear calipers, Cross drilled and slotted w/free new Apexi brake pads $275; BNIB

9) Non-VSPEC R33 GTR Rear Subframe and non-hydraulic mechanical R200 differential $690; used

10) Seibon CF R33 Jun style hood $648; used

11) Greddy non-vspec rear diff cover $296; BNIB

12) Mahle Pistons; no rings included $995; BNIB

13) APEXi N1 r33/r34 PRO Adjustable Dampers Coilover for circuit/track/street #263AN009; Apexi remanufactured now in new condition ($2500 msrp) $1495

14) Tomei 290 11.5 #1421 290115 r34 GTR WPC treated camshafts (pair) $OLD; BNIB

15) 2.8 Stroker Kit: HKS Step 2 forged pistons 87mm, Carillo Pro-H connecting rods, Crower.com (not BC) crankshaft; excellent condition, low miles $2995; used

16) Factory OEM Genuine r33 gtr wheels Falken good tires $OLD; used

17) r34 garage saurus cf ground effect (side skirts, front diffuser, rear spats); has cracks; see pics $OLD; used

18) r34 top secret frp hood $562; used

19) r34 oem cf rear vspec diffuser $OLD; used

20) r34 N1 Race Super Taikyu cf reinforced front bumper with diffuser $450; used

21) r34 rear trunk lid (damaged, someone tried to pry open trunk) $45; used

22) r34 nismo white face gauge cluster 320km $OLD; used

23) r34 gtr xenon passenger LH headlight with Signal Auto hi-beam air duct mod w/free eye brow/lids uninstalled $OLD; used

24) r34 exedy triple clutch #NM053SR $1495; BNIB

25) r33 front bumper support reinforcement bar $45; used

26) Lexus SC300 leather steering wheel with airbag $75; used

27) PFC 7778.01.20.44 Race Compound 01 Pad 20mm Carbon Metallic front brake pads for Endless, AP, Alcon 6-POT BBK big brake kit $240; like new

28) Endless Matador Series MA22B Brake Pads for Endless, AP, Alcon 6-POT BBK big brake kit RCP052MA22B $OLD; BNIB

29) HKS T51R SPL full turbo kit (turbine, shield, manifold, wastegate, downpipe aka front pipe, intake pipe w/filter, screamer pipe) $3995; used

30) r34/r33/r32 gtr front wheel bearings (front pair) $OLD; BNIB

31) r33 signal auto drag spoiler $535; used

32) Veilside race intake plenum aka manifold aka surge tank with throttle body $1595; used

33) Apexi drag core 4 row intercooler, estimated measurements of 140mm thick, 80mm turbo side, 100mm intake side $1495; used

34) Hawk Brake pads HB180 HPS .591 for factory r33/r34 Skyline GTR rear calipers Ferro Carbon Street compound $OLD; new

35) Hawk Brake pads HB209F .583 for Honda Civic HPS compound $44; new

36) Centric standard brake rotors #121.42013 for 1990-1992 Infiniti M30 $39 for the pair; bnib

Edited by ocskyline
  • 2 weeks later...
  • 2 weeks later...

Rear Subframe and Greddy diff cover sold.

New pics of 2.8 Stroker $2995:

post-62118-1443566451563_thumb.jpg

R33 GTR strut bar $95:

post-62118-14435664950562_thumb.jpg

Brembo 332mm 2-PC rotors $995

post-62118-14435665313824_thumb.jpg

post-62118-14435669833511_thumb.jpg

USD. Located in California USA

  • 2 weeks later...

Some parts left. Added new stuff. New prices:

Massive skyline parts for sale

Mostly, R32/R33/R34 skyline GTR RB26DETT parts for sale unless otherwise noted. More Pics available. No guarantees written or implied. Located in So Cal USA. Paypal plus 4%. Pick up ok. Buyer pays shipping. Check USPS.com flat rate boxes for shipping estimates. Prices are in USD. Thanks for looking.

BNIB = brand new in box

1)Cusco Hicas eliminator aka delete $old; BNIB

2)Attain Hicas eliminator aka delete $49; BNIB

3)Exedy triple clutch r33/r32 push; NM033HRWH, $OLD; BNIB

4)Ogura triple clutch r33/r32 push 1000F; needs new plates $595; used

5)TRUST GREDDY SPEC-R HG FMIC KIT BCNR33 TWIN ENTRY TYPE 27 CORE; Notes:

R spec Intercooler, dim: 294x710x165mm (largest GReddy core), Inlet 70mm x 2, 100mm outlet, #12020440 ($2800 msrp) $OLD; BNIB

6) APEXi N1 r33/r34 Pro Drag racing Adjustable Dampers Coilover; Apexi remanufactured now in new condition ($2500 msrp) $1195

7)Brembo 2-piece 332mm = 13" front rotors (pair) for F50 Big Brake Kit $850; used

8)APEXi Super Brake Rotors #278-nr10 for factory r33/r34 Skyline GTR rear calipers, Cross drilled and slotted w/free new Apexi brake pads $275; BNIB

9)Non-VSPEC R33 GTR Rear Subframe and non-hydraulic mechanical R200 differential $old; used

10)Seibon CF R33 Jun style hood $599; used

11)Greddy non-vspec rear diff cover $old; BNIB

12)Mahle Pistons; no rings included $695; BNIB

13)APEXi N1 r33/r34 PRO Adjustable Dampers Coilover for circuit/track/street #263AN009; Apexi remanufactured now in new condition ($2500 msrp) $1195

14)Tomei 290 11.5 #1421 290115 r34 GTR WPC treated camshafts (pair) $OLD; BNIB

15)2.8 Stroker Kit: HKS Step 2 forged pistons 87mm, Carillo Pro-H connecting rods, Crower.com (not BC) crankshaft; excellent condition, low miles $2995; used

16)Factory OEM Genuine r33 gtr wheels Falken good tires $OLD; used

17)r34 garage saurus cf ground effect (side skirts, front diffuser, rear spats); has cracks; see pics $OLD; used

18)r34 genuine top secret frp hood $499; used

19)r34 oem cf rear vspec diffuser $OLD; used

20)r34 N1 Race Super Taikyu cf reinforced front bumper with diffuser $450; used

21)r34 rear trunk lid (damaged, someone tried to pry open trunk) $45; used

22)r34 nismo white face gauge cluster 320km $OLD; used

23)r34 gtr xenon passenger LH headlight with Signal Auto hi-beam air duct mod w/free eye brow/lids uninstalled $OLD; used

24)r34 exedy triple clutch #NM053SR $1395; BNIB

25)r33 front bumper support reinforcement bar $45; used

26)Lexus SC300 leather steering wheel with airbag $75; used

27)PFC 7778.01.20.44 Race Compound 01 Pad 20mm Carbon Metallic front brake pads for Endless, AP, Alcon 6-POT BBK big brake kit $199; like new

28)Endless Matador Series MA22B Brake Pads for Endless, AP, Alcon 6-POT BBK big brake kit RCP052MA22B $OLD; BNIB

29)HKS T51R SPL full turbo kit (turbine, shield, manifold, wastegate, downpipe aka front pipe, intake pipe w/filter, screamer pipe) $OLD; used

30)r34/r33/r32 gtr front wheel bearings (front pair) $OLD; BNIB

31)r33 signal auto drag spoiler $399; used

32)Veilside race intake plenum aka manifold aka surge tank with throttle body $1395; used

33)Apexi drag core 4 row intercooler, estimated measurements of 140mm thick, 80mm turbo side, 100mm intake side $1395; used

34)Hawk Brake pads HB180 HPS .591 for factory r33/r34 Skyline GTR rear calipers Ferro Carbon Street compound $OLD; new

35)Hawk Brake pads HB209F .583 for Honda Civic HPS compound $44; new

36) Centric standard brake rotors #121.42013 for 1990-1992 Infiniti M30 $39 for the pair; bnib

37) r33 GTR strut tower bar $95; used

38) r33 GTR rear seats $95; used

39) oem Pistons set from 1999 r34 GTR vspec, $150; used, one damaged

40) Hks version ati race damper #916060 (hks pulleys not included), $399, used

Pics:

http://orangecounty.craigslist.org/pts/5266380567.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...