Jump to content
SAU Community

Recommended Posts

Hi guys and girls, I have decided to go for a single turbo while my engine is out and to fund it I am selling off my full twin turbo setup.

Now it comes with everything you need to literally bolt up to your stock rb26.

Including HKS 2540 twins (flow a little more than hks2530s at moderate boost levels but really come to life when u really wind the boost up)

I made 305kw@wheels on 17psi untuned, I wound them up to 24psi and had massive top end rush from 5k onwards and held all the way to my 8300rpm limiter. So, great for drag racing but not the best for tight hillclimbs etc.

The turbos have zero shaft play, or damage. I am simply going Single while my engine is out. Come and inspect, they come with HKS actuators and studs, manifolds and even oil lines if you require them. $1300

Next is the exhaust system (Xforce split dumps) Stainless. perfect condition. $250

HKS midpipes. twin 2.25 into 3inch ($300

3inch catback exhaust its on my r34 but came off a 33 gtr. ($300

and to aid in response and flow I have a custom twin turbo pipe with divider added $200 (eliminates turbo shuffle and improves response)

Or the whole lot as a package for $2100.

I can post anywhere you like. located Newcastle NSW

Cheers fellas,

Blake

attachments (1).zip

attachments.zip

Need money for a to finish my build! Buy my stuff :)

Turbo's $1000

Dumps $225

Midpipes $225

Exhaust $250

Split twin turbo merge pipe $200

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...