Jump to content
SAU Community

Recommended Posts

Deatschwerks 440cc Injectors x 6 - $350 can include stock fuel rail if needed. No resistor pack required to run, plug & play.

Installed new and used for approximately 3000km of street driving. Removed due to upgrade to RB25.

RRP $460AUD + post

Wiring Specialties RB20 Coilpack loom - $100

Installed new and used for approximately 3000km of street driving. Removed due to upgrade to RB25.

RRP $150AUD

R32 Fixed back Bride Rail (Drivers side)- $100

2 piece rail, was fitted to Bride EXAS. Will confirm part number later.

APexi Active Tail Silencer - suit 90mm muffler tips $200

Test fitted and started car once with it on in garage, never driven with. Comes with Box and instructions.

RRP $275AUD + Post

Pickup Burwood, Vic or can post items at buyer expense.

May consider swaps with cash adjustment for good condition R32Type M sideskirts.

Contact via PM

Edited by Frushlife
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
    • Yes, well. Mine are less than half that. ARBs are not set to "dumb" either.
    • I would hope. But, we all know even the best companies have an issue sporadically.
×
×
  • Create New...